Perth and Kinross · Scotland
Bath Resealing for Rattray homes
Bath, shower and sink resealing with new mould-resistant silicone at your home in Rattray, with a one-year guarantee on every repair.
- A messy previous reseal
- Silicone coming away from the tiles
- Stained silicone
Bath resealing at your home in Rattray
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. We work on shower trays & enclosures, basins & vanity units and wet rooms, and people most frequently call us about discoloured, yellow sealant and an untidy old seal.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Rattray (PH10)
- Region
- Perth and Kinross
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We work for landlords, letting agents and housing providers in Rattray as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
When a repair isn’t the answer
To be straight with you, there are a few things a repair will not fix:
- Hollow or loose tiles
- Movement in the bath or tray
- Gaps too big for silicone alone
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
- Wet rooms
Rattray and the surrounding area
Rattray is about 1 mile north-east of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH10, a technician comes to you. We work in 107 places in Perth and Kinross, from the larger towns to small villages. You can also see our page for Edinburgh, about 45 miles away.
All of PH10 is covered. Streets in the area include New Road, Croft Lane and Haugh Road. With the A926 close by, Rattray is easy for our technicians to reach. If you’re just outside Rattray, we cover Blairgowrie and Rattray (1 mile south-west), Carsie (2 miles south-west), Kinloch (2 miles west), Meikleour (4 miles south-west) and Coupar Angus (4 miles south-east). We also work in nearby towns such as Perth (14 miles south), Letham (14 miles south-west), Scone (12 miles south), Tulloch (13 miles south-west), Alyth (4 miles north-east) and Oakbank (15 miles south).
What’s near Rattray
Typical jobs here are in homes near Blairgowrie High School, Parish Church and The Ericht Ale House, among other places. Further afield, we also cover the area around Lethendy House (3.4 miles south-west) and Blairgowrie Community Hospital (0.7 miles south-west). For a walk, there is Hill of Alyth and Black Loch.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Prices and what affects them
You’ll know the full cost before booking. We look at:
- What kind of damage it is
- The material and finish
- Unusual colours or finishes
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A photo taken from further back
- Something in shot to show the size
- Your postcode, so we can check dates
- Natural light rather than flash
For a price in Rattray, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
When to call us in Rattray
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.
Send us a picture if you notice any of these:
- Old sealant that looks dirty
- Water getting behind the bath or tray
- Sealant that is split or lifting
- Missing sealant behind the taps
Comparing quotes
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- Aftercare advice
- How soon you can use it again
Nearby places to Rattray
What else we do in Rattray
Aftercare tips
Once the work has cured, treat it gently:
- Replace the seal when mould sets in
- Air the room after use
- Keep bottles off the joints
- Clean the sealant gently and regularly
Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Questions from Rattray
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What does bath resealing cost?
We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your PH10 postcode.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I stop mould in sealant?
Normally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
How long does a reseal take?
Typically a couple of hours, plus curing time.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What areas do you cover?
The entire UK, including all of Perth and Kinross. Send your postcode with your photos and we will offer you dates.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow about two hours for a bath from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Keep a parking space free if you can
- Let the surface dry out before the visit
- Let us know which floor the room is on
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Is resealing worth it?
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Same prices wherever you are
- Most jobs done in one visit
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
