St Helens · England
Bath Resealing for Ravenhead homes
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Ravenhead and across St Helens. Free, fixed quotes from your photos.
- Water getting behind the bath or tray
- Discoloured, yellow sealant
- Silicone smeared on tiles
When we would advise against a repair
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Tiles that move, until they’re refixed
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
Bath resealing at your home in Ravenhead
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. Whether it’s missing sealant behind the taps and black spots in the silicone, we can typically put it right, on shower trays & enclosures, kitchen worktops & sinks and wet rooms alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Ravenhead and across St Helens.
- Area
- Ravenhead (WA10, WA9)
- County
- St Helens
- Cover
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Ravenhead
Also in Ravenhead
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes about two hours for a bath. We tidy up before we leave and tell you when it’s ready to use.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Make sure the area is dry
How to get a price
Email us photos of the damage and one of the entire item, and tell us you are in Ravenhead, and we will reply with a fixed quote.
Advice
How to care for the repair
Most damage we see is avoidable. A few tips:
- Reseal when black spots will not clean off
- Clean the sealant gently and regularly
- Ventilate the bathroom well
- Store bottles on a shelf
Let it cure fully before using the bath or shower, normally around 24 hours.
Black mould in sealant isn’t just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
Prices and what affects them
You will know the full cost before booking. We look at:
- How many areas need work
- Whether old repairs or coatings need taking off
- What the surface is made of
- Access to the area
Our prices are the same across the UK, with no extra for Ravenhead. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- A photo taken from further back
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Why it’s worth resealing in Ravenhead
Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Free fixed quotes from pictures
- Most jobs done in one visit
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
Take a look at our pricing.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Our work in Ravenhead
Ravenhead is about 1 mile south-west of St Helens, in St Helens. Customers in Ravenhead get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Ravenhead is one of 32 towns and villages in St Helens where we work. We work right across the region, from Ravenhead to Liverpool (about 8 miles away).
Our visits in WA10 and WA9 are booked in the same way as anywhere else. From Elm Road, Kings Road and Leslie Road or a nearby road, we can come to you. We also travel to West Park (1 mile north-west), Thatto Heath (1 mile south), St Helens (1 mile north-east), Eccleston (1 mile north-west) and Eccleston Park (2 miles south-west). Further out, we also cover Newton-le-Willows (5 miles east), Haydock (4 miles north-east), Earlestown (4 miles east), Rainford (4 miles north), Blackbrook (3 miles north-east) and New Boston (4 miles north-east). Ravenhead is one of the larger places we cover in St Helens.
Around Ravenhead
In Ravenhead, that means homes near Bird i'th Hand pub, Carmel College and St John the Evangelist and the streets around them. You will also find Gamble Institute (1 mile north-east), Thatto Heath Community Primary School (0.5 miles south) and Thatto Heath Park (less than half a mile south-west). The closest station to Ravenhead is Thatto Heath station, roughly 0.5 miles south-west. Further afield, we also cover the area around Prescot Shopping Centre (2.3 miles south-west) and St Helens Hospital (1.4 miles east). Not far away are Billinge Hill.
Common problems we fix in Ravenhead
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
Keep an eye out for these signs:
- Water getting behind the bath or tray
- A messy previous reseal
- Stained silicone
- Unsealed corners
What to look for in a quote
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
- How to care for the finish
- What preparation is included
FAQs for Ravenhead
How do I get a price for bath resealing in Ravenhead?
The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you cover the entire of St Helens?
Everywhere in the UK, Ravenhead included. Travel is included in the price.
How long will it take?
Around two hours for a bath, then it needs to cure.
About our accreditations · Every repair comes with a one-year guarantee.
