Devon · England

Bath Resealing for Rewe homes

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Rewe. Free, fixed quotes from your photos.

  • Water getting behind the bath or tray
  • A messy previous reseal
  • Mould you cannot clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Rewe

Bath resealing in Rewe without replacing anything

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours. We regularly repair baths, basins & vanity units and shower trays & enclosures, and the jobs we see most are black spots in the silicone and gaps by the taps.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Technician in a mask working on a freestanding roll-top bath
Where
Rewe (EX5)
County
Devon
Cover
12 months on all our work
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Repairs by material

Baths

Baths are resealed with water in them, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Your questions about bath resealing in Rewe

Is repairing better than replacing?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

When can I use the bath after resealing?

Usually after around 24 hours. We confirm before we leave.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we will plan for it.

Is the work guaranteed?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Our work in Rewe

Rewe is about 5 miles north of Exeter, in Devon. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Rewe is one of 586 towns and villages in Devon where we work.

Our visits in EX5 are booked in the same way as anywhere else. We also travel to Poltimore (2 miles south-east), Broadclyst (3 miles south-east), West Clyst (3 miles south-east), Pinhoe (3 miles south) and Monkerton (4 miles south). Within a short drive, we also cover Exeter (5 miles south), Exmouth (12 miles south), Tiverton (8 miles north), Sidmouth (13 miles south-east), Honiton (13 miles east) and Dawlish (14 miles south).

What’s near Rewe

In Rewe, that means homes near The Parish Church of St Mary and Stoke Canon Church of England Primary School and Pre-School. The nearest railway station is Pinhoe station, roughly 3.6 miles south of the centre. Nearby you will also find Danes Castle (4.3 miles south) and Honeylands (3.9 miles south). Not far away are Raddon Top.

Map of Rewe © OpenStreetMap contributors

Is resealing worth it?

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why us?

  • One price list for the whole UK
  • Work done at your home or business
  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor

Read our prices page.

What a repair can’t fix

To be straight with you, there are a few things a repair won’t fix:

  • Tiles that move, until they’re refixed
  • A flexing bath
  • Gaps so wide they need filling or trims before sealing

Send us photos and we’ll tell you honestly before you book.

Surfaces we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units
  • Baths

How it works

There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to about two hours for a bath, tidy-up included.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Clear the area around the damage
  • Have somewhere for us to park nearby if possible

Getting a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Related advice

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Keep bottles off the joints
  • Ventilate the bathroom well
  • Clean the joints with a mild cleaner
  • Reseal at the first sign of lifting

Let it cure fully before using the bath or shower, normally about a day.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

Common problems we fix in Rewe

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.

Keep an eye out for any of the following:

  • Stained silicone
  • Black mould in the sealant
  • Damp near the bath
  • Gaps by the taps

Before you book anyone

  • Who will actually do the work
  • Is the price fixed, and does it include VAT?
  • How the room is protected while they work
  • What aftercare is recommended

Choosing a repair company

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

How we price bath resealing

You’ll know the full cost before you book. We take into account:

  • How easy the damage is to reach
  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from photos

Good pictures mean an accurate price. Here’s what helps:

  • Your postcode, so we can check dates
  • Any details about the material
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.