Gwynedd · Wales

Bath Resealing for Rhoslan homes

Bath resealing in Rhoslan without the cost of replacing. Send us photos for a fixed price, then book a visit.

  • An untidy old seal
  • Silicone coming away from the tiles
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Rhoslan

Bath resealing at your home in Rhoslan

We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Typical jobs include a messy previous reseal and silicone coming away from the tiles, across kitchen worktops & sinks, shower trays & enclosures and baths.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Rhoslan (LL52)
County
Gwynedd
Warranty
One year on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

Our work in Rhoslan

Rhoslan is about 20 miles south of Bangor, in Gwynedd. Wherever you are in the LL52 postcode area, we carry out the work at your property. Our technicians cover 165 places across Gwynedd. We work right across the region, from Rhoslan to Liverpool (about 64 miles away).

Postcode districts we cover here: LL52. Main roads around Rhoslan include the B4411, so getting to you is simple. Close by, we cover Llanystumdwy (2 miles south), Criccieth (2 miles south-east), Bryncir (2 miles north), Pentrefelin (3 miles east) and Chwilog (3 miles south-west). Larger places within reach include Caernarfon (13 miles north), Pwllheli (8 miles south-west), Llanbeblig (13 miles north), Porthmadog (5 miles east), Blaenau Ffestiniog (14 miles east) and Morfa Nefyn (12 miles west).

Near you in Rhoslan

The closest station to Rhoslan is Criccieth station, roughly 2.1 miles south-east of the centre. Nearby you will also find Ysbyty Alltwen (4.6 miles east) and Criccieth Castle (2.3 miles south-east). For a walk, there is Llyn Ystumllyn and Bryniau Ystumcegid.

Map of Rhoslan © OpenStreetMap contributors

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

How it works

Arrival times are agreed in advance, so you know when to expect us. On site, it takes about two hours for a bath. We leave the room clean.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift

Ask for a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a free quote

Read more

Honest limits

We will not take on work that won’t last, so these are the limits:

  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Rhoslan

  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Basins & vanity units
  • Shower trays & enclosures

Questions from Rhoslan

Are there extra charges for Rhoslan?

Travel is included in the price, and we charge the same wherever you are.

How long does resealing take?

Around two hours for a bath, then it needs to cure.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Why does mould come back so fast?

Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

How do I get a price for bath resealing in Rhoslan?

Because every job differs, we price from photos. You will get a fixed figure before booking.

What happens after I send photos?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Landlords, agents and businesses in Rhoslan

For anyone letting property in or around Rhoslan, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Resealing in Rhoslan: why it matters

Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • Everything repaired in place
  • Most jobs done in one visit
  • A year’s guarantee on all work
  • Free fixed quotes from pictures

Read our full price list.

Aftercare tips

Looking after the surface is easy:

  • Don’t stand toiletries on the seal
  • Wipe the joints dry after use
  • Give the seal a regular clean
  • Let steam out after showers

Avoid scraping the joints, and don’t stand bottles on the seal.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

What affects the price in Rhoslan

There is no area surcharge for Rhoslan. What changes the price is:

  • The material
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.

Send pictures for a quote

You can generally get a fixed price without us visiting. To make it quick:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Details of any past repairs

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.