Hertfordshire · England
Bath & shower resealing (mastic) in Ridge, Hertfordshire
Bath resealing for Ridge, without a refit. Get a fixed quote from your pictures, then we come to you.
- Damp near the bath
- Gaps in the seal
- Gaps by the taps

Is resealing worth it?
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
What you get with us
- One visit for most repairs
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
See our pricing.
Bath resealing in Ridge, done in place
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. Whether it’s leaks at the edges and gaps by the taps, we can help.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

- Area
- Ridge (EN6)
- Region
- Hertfordshire
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Ridge
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a couple of hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Getting a price
If you are in Ridge and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Nearby places to Ridge
Also in Ridge
Signs you need bath resealing in Ridge
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
It’s worth getting a quote if you see:
- Discoloured, yellow sealant
- Black mould in the sealant
- Damp near the bath
- Unsealed corners
Before booking anyone
- When it can be used again
- Who turns up on the day
- A fixed price, and whether VAT is included
- How your room will be protected
FAQs for Ridge
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How do I book?
Use the quote form or ring 0345 017 0787.
How do I get a price for bath resealing in Ridge?
The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Air the room after use
- Reseal at the first sign of lifting
- Run the extractor fan during and after showers
- Keep the joints dry
Let it cure fully before using the bath or shower, usually around 24 hours.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
What bath resealing costs
Each job gets its own fixed quote. This is what makes a difference:
- The material and finish
- How much damage there is
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- One picture of the entire bath or shower
- One sharp close-up of the damage
- What it’s made of, if you know
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
About Ridge
Ridge is about 2 miles north-east of Borehamwood, in Hertfordshire. Customers in Ridge get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Ridge is one of 381 places in Hertfordshire we cover. Our jobs stretch from Ridge to London (about 15 miles away).
Postcode districts we cover here: EN6. From Crossoaks Lane, Deeves Hall Lane and Blanche Lane or a nearby road, we can come to you. We also cover the places around Ridge: South Mimms (1 mile north-east), Dancers Hill (1 mile south-east), Well End (1 mile south), Green Street (2 miles south-west) and Shenley (2 miles west). We also work in nearby towns such as Watford (7 miles west), Hemel Hempstead (10 miles north-west), Stevenage (15 miles north), St Albans (6 miles north-west), Welwyn Garden City (8 miles north) and Harpenden (10 miles north-west).
Local landmarks in Ridge
Typical jobs here are in homes near Dame Alice Owen's School, St Giles' CofE Primary School and North Mimms Park and the streets around them. Nearby too are The Old Guinea pub (less than half a mile south-west), Church of St Margaret (less than half a mile west) and Manor Lodge School (1.4 miles north-west). The nearest railway station is Potters Bar station, roughly 2.3 miles east. Other landmarks nearby include Hilfield Castle (4.6 miles south-west) and Hertfordshire Scout Museum (1.4 miles south-west). Open spaces near Ridge include Darland's Lake and Furzefield Wood and Lower Halfpenny.
About our accreditations · Every repair comes with a one-year guarantee.

