Plymouth · England
Bath & shower resealing (mastic) in Roborough, Plymouth
Bath resealing in Roborough without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Silicone smeared on tiles
- Mould you cannot clean out
- Silicone coming away from the tiles

Why reseal now?
Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Roborough clients choose us
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- A fixed quote before booking
- We come to you, anywhere in the UK
Take a look at our pricing.
Bath resealing in Roborough, done in place
We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Our repair technicians work on shower trays & enclosures, wet rooms and baths, and common reasons people get in touch are old sealant that looks dirty and silicone coming away from the tiles.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

- Where
- Roborough (PL6)
- County
- Plymouth
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Roborough
Roborough is about 4 miles north of Plymouth, in Plymouth. Wherever you are in the PL6 postcode area, a technician comes to you. Roborough is one of 59 places in Plymouth where we work.
Postcode districts we cover here: PL6. We regularly work on streets such as Broadley Court, Parkwood Close and Broadley Park Road. We also cover the places around Roborough: Woolwell (1 mile south-east), Southway (1 mile south-west), Tamerton Foliot (2 miles south-west), Milton Combe (2 miles north) and Whitleigh (2 miles south-west). Further out, we also cover Plymouth (4 miles south), Mannamead (4 miles south), Lipson (5 miles south), Mutley (4 miles south), North Prospect (4 miles south-west) and Stoke (5 miles south-west).
Around Roborough
Locally, our jobs take us to homes close to Church of the Holy Spirit, Lopes Arms and Southway Library, among other places. You will also find Notre Dame RC School (1.7 miles south) and Widewell Primary Academy (0.9 miles south). The closest station to Roborough is Bere Ferrers station, roughly 2.8 miles west of the centre. Other landmarks nearby include Tamar Belle Visitor Centre (2.7 miles west) and Derriford Hospital (2 miles south). Open spaces near Roborough include Berra Tor.
Landlord and trade work in Roborough
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Roborough as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Your questions about bath resealing in Roborough
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
What areas do you cover?
All of Plymouth, and the rest of the UK. There’s no extra charge for travel.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
When can I use the bath after resealing?
You will get the curing time from us, usually around a day.
How to look after the repair
So the finish stays in good condition for years:
- Replace the seal when mould sets in
- Give the seal a regular clean
- Run the extractor fan during and after showers
- Dry the seal after bathing
Let it cure fully before using the bath or shower, normally about a day.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Also near Roborough
Also in Roborough
What bath resealing costs
Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The material and finish
- How hard the colour is to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- Natural light rather than flash
- A close-up of the damage, in focus
- A photo taken from further back
- Where you are, by postcode
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath or tray that moves, until its support is fixed
- Gaps too big for silicone alone
- Hidden water damage
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes around two hours. If anything looks different from your photos, we will talk to you before going ahead.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Related advice
Common problems we fix in Roborough
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
The most common problems we’re called about are:
- Damp near the bath
- Black mould in the sealant
- Silicone coming away from the tiles
- Gaps by the taps
Before booking anyone
- Whether there are any call-out or travel charges
- Who turns up on the day
- Whether cleaning and preparation are in the price
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.

