Hampshire · England

Bath & shower resealing (mastic) in Rockford, Hampshire

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Rockford and across Hampshire. Free, fixed quotes from your pictures.

  • Black spots in the silicone
  • Missing sealant behind the taps
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Rockford

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

Bath resealing in Rockford without replacing anything

A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why so many DIY reseals peel. If you are dealing with stained silicone and mould you can’t clean out, we can help, on shower trays & enclosures, baths and wet rooms alike.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Technician in a mask working on a freestanding roll-top bath
Location
Rockford (BH24)
Region
Hampshire
Guarantee
One year on every repair
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

Baths are resealed with water in them, to open the joint fully.

Honest limits

Not everything can be repaired, and we’ll tell you before we start. We can’t fix:

  • Tiles that move, until they’re refixed
  • Rotten walls or floors behind the bath
  • A bath or tray that moves, until its support is fixed

If in doubt, send pictures and we will say what we think before booking.

Surfaces we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Basins & vanity units

Rockford: your questions answered

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Are there extra charges for Rockford?

There’s no separate call-out charge. Your fixed quote includes everything.

Why does mould come back so fast?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Do you cover Rockford?

Yes, we do. Repair technicians travel to Rockford from across the region, with no extra charge for travel.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Do you seal over the old sealant?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

How to care for the repair

Most damage we see is avoidable. These habits help:

  • Replace the seal when mould sets in
  • Use the extractor fan
  • Store bottles on a shelf
  • Keep the joints dry

Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

About Rockford

Rockford is about 4 miles east of Verwood, in Hampshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Rockford is one of 683 towns and villages in Hampshire we cover.

We cover every part of BH24. Neighbouring places we cover include Highwood (1 mile south-east), Blashford (1 mile south-west), Ibsley (1 mile north-west), Mockbeggar (1 mile north) and Ellingham (1 mile west). Larger places within reach include Totton (12 miles east), Lymington (13 miles south-east), Romsey (15 miles north-east), New Milton (10 miles south-east), Barton on Sea (10 miles south-east) and Marchwood (14 miles east).

Near you in Rockford

In Rockford, that means homes near Alice Lisle Inn, Ringwood School Academy and Poulner Junior School and the streets around them. Other landmarks nearby include St Leonard's Hospital (5.4 miles south-west) and Fordingbridge Doll Museum (3.7 miles north). Green spaces nearby include Linbrook Lake and Blashford Lakes.

Map of Rockford © OpenStreetMap contributors

Signs you need bath resealing in Rockford

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.

Look out for any of the following:

  • Old sealant that looks dirty
  • Missing sealant behind the taps
  • Black spots in the silicone
  • Damp near the bath

What to look for in a quote

  • What prep work is covered
  • The length of the guarantee and what it covers
  • What happens if they find more damage
  • A fixed price, and whether VAT is included

How to compare quotes

Work for landlords and builders

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We tidy up before we leave and tell you when it’s ready to use.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Have somewhere for us to park nearby if possible
  • Make sure the room can be ventilated

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.

Get a free quote

Read more

Why reseal now?

Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • Normally one visit, start to finish
  • Everything repaired in place
  • Every repair guaranteed for a year
  • Technicians who travel to you, UK-wide

Read our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.