Hampshire · England
Bath & shower resealing (mastic) in Rowner, Hampshire
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Rowner and across Hampshire. Send photos for a free, fixed quote.
- Black mould in the sealant
- Unsealed corners
- Discoloured, yellow sealant
Where we work around Rowner
Rowner is about 2 miles north-west of Gosport, in Hampshire. Whether you’re in the middle of Rowner or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Rowner is one of 683 towns and villages in Hampshire where we work. You can also see our page for London, about 66 miles away.
We work across the PO13 and PO14 postcode area. Whether you live on Wych Lane, Camp Road and Keyes Road or anywhere nearby, a technician can come to you. Nearby, we also work in Bridgemary (1 mile south-east), Peel Common (1 mile west), Crofton (1 mile west), Elson (1 mile south-east) and Lee-on-the-Solent (2 miles south-west). Larger places within reach include Havant (9 miles east), Eastleigh (12 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west), Hedge End (9 miles north-west) and Waterlooville (8 miles north-east).
Local landmarks in Rowner
In Rowner, that means homes near Holbrook Primary School, The Green Dragon pub and St Matthew's, among other places. Other local landmarks include Bridgemary School (under half a mile north-east) and Baycroft School (1.3 miles west). For rail, the closest station is Fareham station, about 2.3 miles north. Further afield, we also cover the area around Gosport War Memorial Hospital (2.3 miles south-east) and Portchester Castle (2.9 miles east). For a walk, there’s West of the River Alver and Portsdown Hill.
Bath resealing in Rowner, done in place
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. Our technicians work on baths, kitchen worktops & sinks and shower trays & enclosures, and common reasons people contact us are old sealant that looks dirty and an untidy old seal.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Rowner (PO13, PO14)
- County
- Hampshire
- Cover
- One year on every repair
- Price
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Nearby places to Rowner
More services for Rowner
Why reseal now?
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. We charge the same wherever you are, with no extra for Rowner. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Rowner customers choose us
- Fixed prices from your photos
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Straight answers about what a repair can do
Read our full price list.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We tidy up before we leave and tell you when it’s ready to use.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
Ask for a price
To get a price, send a couple of photos through our quote form or ring us. We will say immediately whether it can be repaired.
Related advice
Aftercare tips
So the finish stays in good condition:
- Keep bottles off the joints
- Ventilate the bathroom well
- Reseal at the first sign of lifting
- Clean the sealant gently and regularly
Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Rowner questions
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
How long does a reseal take?
Around two hours for a bath, then it needs to cure.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can new silicone go over old?
All the old sealant comes out. Fresh silicone doesn’t stick to old.
How long before I can shower?
Normally about a day later. We confirm before we leave.
What we can’t put right
Some jobs aren’t right for a repair, for example:
- Very wide gaps that need a trim
- Tiles that move, until they’re refixed
- Hidden water damage
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Rowner
- Kitchen worktops & sinks
- Baths
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
What bath resealing costs
You won’t pay by the hour. The price depends on:
- The type of damage
- The material and finish
- How many areas need work
- The colour and finish to match
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Quotes from your photos
Most quotes are done from photos alone. To help us price it:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Any details about the material
- Something in shot to show the size
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Common problems we fix in Rowner
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
Common reasons people in Rowner contact us include:
- Water getting behind the bath or tray
- Sealant that’s split or lifting
- Stained silicone
- A messy previous reseal
What to look for in a quote
- Whether the price covers travel
- How soon you can use it again
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
Landlords, agents and businesses in Rowner
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
