Highland · Scotland

Bath & shower resealing (mastic) in Saltburn, Highland

We travel to Saltburn for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Unsealed corners
  • Old sealant that looks dirty
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Saltburn

Saltburn: your questions answered

Do the materials smell?

There may be a mild smell during the work.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Is the work guaranteed?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before.

My seal keeps tearing. Why?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

How do I get a price for bath resealing in Saltburn?

Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.

About our bath resealing in Saltburn

Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, plus curing time. Typical jobs include black mould in the sealant and gaps by the taps, across baths, wet rooms and kitchen worktops & sinks.

Every job is backed for twelve months in Saltburn and everywhere else. If something goes wrong with the work, we come back.

Location
Saltburn (IV18)
Area hub
Highland
Warranty
A year, on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Where we work around Saltburn

Saltburn is about 13 miles north-west of Nairn, in Highland. Anywhere in IV18, a technician comes to you. We cover 253 places in Highland.

Every address in IV18 is within our area. Whether you live on Inglis Road, Murray Road and Cadboll Road or a nearby road, a technician can come to you. We also travel to Invergordon (1 mile south-west), Barbaraville (2 miles north-east), Kilmuir (3 miles north-east), Dalmore (4 miles west) and Davidston (4 miles south-east). Further out, we also cover Nairn (13 miles south-east), Cradlehall (15 miles south), Tain (8 miles north-east), Merkinch (15 miles south), Dingwall (12 miles south-west) and Alness (4 miles west). For island and remote addresses, ring us first and we’ll plan the trip.

Landmarks near Saltburn

Locally, our jobs take us to homes close to Invergordon and the streets around them. The nearest railway station is Invergordon station, about 1.3 miles south-west. Other landmarks nearby include Invergordon Castle (1.5 miles west) and County Community Hospital (less than half a mile south-west). For a walk, there’s Udale Bay RSPB reserve and Loch Achnacloich.

Map of Saltburn © OpenStreetMap contributors

When to call us in Saltburn

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

Customers normally contact us about:

  • Missing sealant behind the taps
  • Black mould in the sealant
  • Silicone coming away from the tiles
  • Old sealant that looks dirty

What your quote should include

  • Who turns up on the day
  • Whether there are any call-out or travel charges
  • How changes to the job are handled
  • How soon you can use it again

10 questions to ask before you book

What we do, step by step

Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow about two hours for a bath, and we’ll keep you posted as we go.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Let us know which floor the room is on
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

How to get a price

Send us a picture of the damage and one of the whole item, with your IV18 postcode, and we will reply with a fixed quote.

Send pictures for a quote

Read more

Why reseal now?

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • Rooms protected and left tidy
  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year

Read our full price list.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

For landlords and businesses

For anyone letting property in or around Saltburn, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

What bath resealing costs

You will know the full cost before booking. We take into account:

  • How much damage there is
  • Any earlier repairs that need removing first
  • The material
  • The colour and finish to match

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Getting a price from photos

Before you send photos, these tips help us give you a firm price:

  • Details of any past repairs
  • A photo taken from further back
  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Hollow or loose tiles
  • Gaps too big for silicone alone
  • A flexing bath

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we repair

  • Wet rooms
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.