Leicestershire · England

Bath & shower resealing (mastic) in Saxby, Leicestershire

Bath resealing across Saxby and nearby, usually in one visit and guaranteed for a year.

  • Missing sealant behind the taps
  • Mould you can’t clean out
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Saxby

What we are called out for in Saxby

Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.

You may need us if you’ve spotted any of these:

  • An untidy old seal
  • Sealant that’s split or lifting
  • Missing sealant behind the taps
  • Discoloured, yellow sealant

Comparing quotes

  • What happens if they find more damage
  • What protection goes down before work starts
  • What prep work is covered
  • Is the price fixed, and does it include VAT?

How to compare quotes

How we handle bath resealing in Saxby

All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Common call-outs are for black spots in the silicone and unsealed corners, on kitchen worktops & sinks, basins & vanity units and baths.

A one-year guarantee comes as standard, so you are covered after the visit.

Roll-top bath being refinished by a Surface Doctor technician
Area
Saxby (LE14)
Region
Leicestershire
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Landlord and trade work in Saxby

We work for landlords, letting agents and housing providers in Saxby as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Covering Saxby

Saxby is about 4 miles east of Melton Mowbray, in Leicestershire. Clients in Saxby get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Saxby is one of 287 towns and villages in Leicestershire where we work. Our nearest city page is Birmingham, about 51 miles away.

Postcode districts we cover here: LE14. Close by, we cover Garthorpe (1 mile north-east), Wymondham (2 miles south-east), Coston (2 miles north-east), Whissendine (4 miles south) and Teigh (4 miles south-east). Further out, we also cover Melton Mowbray (4 miles west), Syston (13 miles south-west), Sileby (14 miles west), Mountsorrel (15 miles west), Barrow upon Soar (15 miles west) and Rothley (15 miles west).

Near you in Saxby

We visit homes around Church of St Peter, among other places. The closest station to Saxby is Melton Mowbray station, roughly 4.3 miles west. Further afield, we also cover the area around Garthorpe Motte (1 mile north-east). For a walk, there is Ankle Hill and Cribb's Meadow.

Map of Saxby © OpenStreetMap contributors

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Prices and what affects them

We charge the same across the UK, including Saxby. What changes the price is:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • The size and number of damaged areas
  • What kind of damage it is

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

Phone pictures are fine, there’s no need for anything special. Ensure they show:

  • Something in shot to show the size
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

What a repair cannot fix

We’d rather lose a job than do one that will not last, so these are the limits:

  • A bath or tray that moves, until its support is fixed
  • Very wide gaps that need a trim
  • Water damage behind the bath that needs a builder

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Baths

Saxby: your questions answered

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What does bath resealing cost?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

How do I stop mould in sealant?

Mould needs moisture. Ventilation and drying keep it clean longer.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

How the visit works

We agree an arrival time beforehand. On site, it takes about two hours for a bath for most jobs. We leave the room clean and ready to use once it has cured.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work

How to get a price

For a price in Saxby, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Advice

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Keep the joints dry
  • Give the seal a regular clean
  • Run the extractor fan during and after showers
  • Let steam out after showers

Let it cure fully before using the bath or shower, normally around 24 hours.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.