Surrey · England

Bath & shower resealing (mastic) in Shillinglee, Surrey

Fixed-price bath resealing in Shillinglee and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Water getting behind the bath or tray
  • Missing sealant behind the taps
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Shillinglee

How we handle bath resealing in Shillinglee

Resealing is quick, but it transforms the look. Fresh joints make the whole room look cleaner, and they protect the walls and floor. We’re often asked to fix water getting behind the bath or tray and gaps in the seal, in shower trays & enclosures, wet rooms and kitchen worktops & sinks.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Location
Shillinglee (GU8)
Area hub
Surrey
Warranty
One year on every repair
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What bath resealing costs

Each job gets its own fixed quote. These are the things that affect it:

  • Where the damage is and how we get to it
  • The size and number of damaged areas
  • Unusual colours or finishes
  • How many items we do on one visit

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from pictures

You can take the photos on your phone, there’s no need for anything special. Ensure they show:

  • Natural light rather than flash
  • A wider photo showing the entire bath or shower
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit

If you’re in Shillinglee and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Signs you need bath resealing in Shillinglee

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

Send us a picture if you notice any of these:

  • Black mould in the sealant
  • Leaks at the edges
  • Discoloured, yellow sealant
  • Gaps by the taps

What your quote should include

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • How long the guarantee is and what it covers
  • Is the price fixed, and does it include VAT?

How to compare quotes

Your questions about bath resealing in Shillinglee

What happens next?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Do you cover Shillinglee?

We do. We send a technician to Shillinglee for every job, with no extra charge for travel.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Why does my sealant keep going mouldy?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

The process

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a couple of hours. We leave the room clean and ready to use once it has cured.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Preparing for the visit

  • Clear the area around the damage
  • Point us to the nearest place to park
  • Have a window or extractor fan available

Ask for a price

Email us photos of the damage and one of the entire item, and tell us you are in Shillinglee, and we’ll come back with a fixed quote.

Get a fixed price

Related advice

Shillinglee and nearby

Shillinglee is about 12 miles south-east of Farnham, in Surrey. Whether you are in the middle of Shillinglee or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 395 towns and villages across Surrey. You can also see our page for London, about 37 miles away.

Every address in GU8 is within our area, from the main roads to the quietest streets. Nearby, we also work in Ramsnest Common (1 mile north-west), Northchapel (2 miles south-west), Ansteadbrook (2 miles west), Ebernoe (3 miles south) and Lurgashall (4 miles south-west). Larger places within reach include Guildford (12 miles north), Farnham (12 miles north-west), Haslemere (4 miles west), Cranleigh (7 miles north-east), Ash (12 miles north) and Godalming (7 miles north).

Landmarks near Shillinglee

The nearest railway station is Witley station, roughly 3.8 miles north. A little further out are Haslemere and District Hospital (3.8 miles west). Open spaces near Shillinglee include Shillinglee Lake and Blackdown.

Map of Shillinglee © OpenStreetMap contributors

Honest limits

We would rather lose a job than do one that will not last, so these are the limits:

  • Water damage behind the bath that needs a builder
  • Movement in the bath or tray
  • Very wide gaps that need a trim

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we repair

  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms

Why reseal now?

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. We charge the same wherever you are, so there’s no premium for Shillinglee. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Dust sheets down, tidy finish
  • We come to you, anywhere in the UK
  • One visit for most repairs
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our pricing.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

How to look after the repair

Aftercare is simple, and it makes a real difference:

  • Give the seal a regular clean
  • Wipe the joints dry after use
  • Use the extractor fan
  • Reseal at the first sign of lifting

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.