Derbyshire · England

Bath Resealing for Shottle homes

Fixed-price bath resealing in Shottle and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Stained silicone
  • Sealant that is split or lifting
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Shottle?

About our bath resealing in Shottle

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. Typical jobs include silicone smeared on tiles and gaps in the seal, in kitchen worktops & sinks, baths and wet rooms.

All of our repairs are guaranteed for twelve months in Shottle and everywhere else. We return to put right any problem with the work.

Where
Shottle (DE56)
Region
Derbyshire
Warranty
One year on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What bath resealing costs

We do not charge extra for travel to Shottle. The price depends on:

  • Previous DIY repairs that have to come out
  • How easy the damage is to reach
  • The type of damage
  • Whether we combine several jobs

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.

How to get a fixed quote

Two or three clear photos are generally enough. Try to include:

  • Any details about the material
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale

Most clients in Shottle get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Do you need bath resealing in Shottle?

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

It’s worth getting a quote if you see:

  • Water getting behind the bath or tray
  • Mould you can’t clean out
  • Missing sealant behind the taps
  • Stained silicone

What to look for in a quote

  • What prep work is covered
  • How soon you can use it again
  • What aftercare is recommended
  • Whether there are any call-out or travel charges

Our hiring checklist

Shottle questions

Why does my sealant keep splitting?

Typically because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

How do I get a price for bath resealing in Shottle?

We give a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item with your DE56 postcode.

Can you price it without visiting?

Nearly always. If pictures do not show enough, we will ask for another angle.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Do the materials smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

How it works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes around two hours, and we finish with a tidy-up and a look at the finished work together.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Let us know about parking or access
  • Let us know if it has been repaired before
  • Ensure the area is dry

Ask for a price

The quickest way to a price is to send two or three photos through our quote form or call us. We will say straight away if a repair is the right fix.

Get a free quote

Advice

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

For anyone letting property in or around Shottle, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.

Keeping it looking good

Nothing complicated is needed:

  • Replace the seal when mould sets in
  • Open a window after bathing
  • Ventilate the bathroom well
  • Do not stand toiletries on the seal

Keep the room well ventilated, and dry the joints after bathing.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

We fill the bath before sealing, to open the joint fully.

About Shottle

Shottle is about 3 miles west of Belper, in Derbyshire. Clients in Shottle get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Shottle is one of 532 places in Derbyshire where we work. Our jobs stretch from Shottle to Manchester (about 41 miles away).

All of DE56 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Belper Lane End (1 mile east), Cowers Lane (1 mile south), Shottlegate (1 mile south), Blackbrook (1 mile south-east) and Idridgehay (2 miles west). Further out, we also cover Chesterfield (14 miles north), Ilkeston (11 miles south-east), Long Eaton (15 miles south-east), Belper (3 miles east), Heanor (8 miles east) and Ripley (6 miles east).

Landmarks near Shottle

Locally, our jobs take us to homes close to St Lawrence and the streets around them. For rail, the closest station is Belper station, roughly 2.5 miles south-east of the centre. Further afield, we also cover the area around Babington Hospital (2.6 miles south-east) and Belper Urban District (2.7 miles east). Not far away are Alport Height and Wyver Lane Nature Reserve.

Map of Shottle © OpenStreetMap contributors

When we would advise against a repair

A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:

  • Loose tiles, which need refixing first
  • Water damage behind the bath that needs a builder
  • A flexing bath

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.