Leicestershire · England
Bath & shower resealing (mastic) in Sibson, Leicestershire
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Sibson. Free, fixed quotes from your pictures.
- Black mould in the sealant
- Leaks at the edges
- A messy previous reseal
Common problems we fix in Sibson
Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
Contact us if you’ve noticed any of these:
- Water getting behind the bath or tray
- Gaps by the taps
- Sealant that’s split or lifting
- Black mould in the sealant
Comparing quotes
- Whether they match the colour on site
- Aftercare advice
- If travel is included in the price
- How changes to the job are handled
About our bath resealing in Sibson
We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours, plus curing time. If you’re dealing with old sealant that looks dirty and water getting behind the bath or tray, we can normally put it right, whatever the material.
We stand behind the work with a one-year guarantee.
- Location
- Sibson (CV13)
- Area hub
- Leicestershire
- Cover
- A year, on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Sibson
Sibson is about 6 miles north of Nuneaton, in Leicestershire. Clients in Sibson get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover all 287 towns and villages in Leicestershire. We work right across the region, from Sibson to Birmingham (20 miles away).
Every address in CV13 is covered, from the main roads to the quietest streets. Local streets include Manor View, Sheepy Road and Twycross Road, and we cover them all. We also cover the places around Sibson: Wellsborough (1 mile north-east), Little Twycross (3 miles north), Bilstone (3 miles north), Congerstone (3 miles north) and Market Bosworth (3 miles east). Further out, we also cover Hinckley (6 miles south-east), Coalville (10 miles north-east), Ashby-de-la-Zouch (10 miles north), Shepshed (14 miles north-east), Lutterworth (15 miles south-east) and Blaby (13 miles east).
What’s near Sibson
In Sibson, that means homes near Church of St Botolph, among other places. For rail, the closest station is Atherstone station, about 3.5 miles south-west of the centre. Well-known places in the area include Ratcliffe Culey (1.8 miles south-west) and Atherstone Heritage Centre (3.4 miles south-west). Open spaces near Sibson include Ambion Hill.
Landlord and trade work in Sibson
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Sibson, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Prices and what affects them
We price every job individually. The main factors are:
- The size and number of damaged areas
- The colour and finish to match
- What kind of damage it is
- How easy the damage is to reach
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Natural light rather than flash
- What it’s made of, if you know
- Details of any past repairs
- A coin beside the damage so we can judge size
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
When a repair is not the answer
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Hidden water damage
- Very wide gaps that need a trim
- Movement in the bath or tray
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Ventilate the bathroom well
- Dry the seal after bathing
- Give the seal a regular clean
- Open a window after bathing
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
Towns and villages near Sibson
Also in Sibson
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
Is resealing worth it?
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Sibson clients choose us
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- One price list for the entire UK
- One-year guarantee on every repair
Take a look at our pricing.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow around two hours from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Sibson: your questions answered
How do I stop mould in sealant?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
Do you work in Sibson?
Yes. We cover the whole UK and come to Sibson. Send pictures and we will quote, or call 0345 017 0787.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
How much does bath resealing cost in Sibson?
We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your CV13 postcode.
How long does a reseal take?
Around two hours for a bath, then it needs to cure.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
My seal keeps tearing. Why?
Normally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.
About our accreditations · Every repair comes with a one-year guarantee.
