Derbyshire · England

Bath & shower resealing (mastic) in Slack, Derbyshire

Our technicians come to Slack for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Mould you can’t clean out
  • Gaps by the taps
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Slack

Bath resealing in Slack without replacing anything

Baths are resealed with water in them, so the joint is at its widest, so the seal does not tear when the bath is first used. Common call-outs are for water getting behind the bath or tray and silicone smeared on tiles, in kitchen worktops & sinks, shower trays & enclosures and baths.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Where
Slack (S45)
Area hub
Derbyshire
Warranty
12 months on all our work
Quote
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Keeping it looking good

It’s all simple stuff:

  • Open a window after bathing
  • Give the seal a regular clean
  • Use the extractor fan
  • Keep bottles off the joints

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

Slack and the surrounding area

Slack is about 6 miles south-west of Chesterfield, in Derbyshire. Jobs in Slack are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover 532 places across Derbyshire. Our nearest city page is Manchester, about 37 miles away.

Here we cover the S45 postcode area. From Amber Lane and Slack Lane or anywhere nearby, a technician can come to you. We also travel to Brockhurst (1 mile north), Uppertown (2 miles north-west), Lumsdale (2 miles south-west), Alicehead (2 miles north) and Tansley (2 miles south). Larger places within reach include Chesterfield (6 miles north-east), Ilkeston (15 miles south-east), Belper (9 miles south), Heanor (12 miles south-east), Dronfield (10 miles north) and Ripley (9 miles south-east).

Near you in Slack

Around Slack, we work in homes near The Old Poets Corner pub, Highfields School and Church of All Saints, among other places. For rail, the closest station is Matlock station, roughly 2.9 miles south-west of the centre. A little further out are The Working Carriage Museum (3.6 miles west) and Willersley Castle (4.3 miles south-west). Open spaces near Slack include Beeley Moor.

Map of Slack © OpenStreetMap contributors

Common problems we fix in Slack

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

Signs it’s time to call us include:

  • Water getting behind the bath or tray
  • Silicone coming away from the tiles
  • Unsealed corners
  • An untidy old seal

Comparing quotes

  • What happens if they find more damage
  • How your room will be protected
  • What the guarantee covers, and for how long
  • What aftercare is recommended

How to compare quotes

Materials and what they mean for the repair

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Hidden water damage
  • Very wide gaps that need a trim
  • A flexing bath

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Wet rooms
  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures

How the visit works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a couple of hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We ensure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Tell us about any previous repairs or coatings
  • Have somewhere for us to park nearby if possible

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a free quote

Related advice

What bath resealing costs

Each job gets its own fixed quote. This is what makes a difference:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • The colour and finish to match
  • Doing more than one item at once

The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

Getting a price from pictures

You can take the photos on your phone. Ensure they show:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Something in shot to show the size
  • Details of any past repairs

For a price in Slack, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Slack questions

What does bath resealing cost?

We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item with your S45 postcode.

Do you come to Slack?

Yes, we do. We send a technician to Slack for every job, and the price is the same as everywhere else.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. If there is more, we will tell you before starting.

How long does a reseal take?

Around two hours for a bath, then it needs to cure.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before.

Is there any odour?

Some materials have a smell while they’re applied. It fades as everything cures.

For landlords and businesses

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.