Derbyshire · England

Bath & shower resealing (mastic) in Brockhurst, Derbyshire

Local bath resealing for Brockhurst: photo quotes, tidy work and a year’s guarantee.

  • Old sealant that looks dirty
  • Missing sealant behind the taps
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Brockhurst

Brockhurst and nearby

Brockhurst is about 5 miles south-west of Chesterfield, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Brockhurst is one of 532 towns and villages in Derbyshire we cover. Our jobs stretch from Brockhurst to Manchester (36 miles away).

Jobs in S45 are booked in the same way as anywhere else. You will find streets such as Kelstedge Lane and Eaton Lane. Nearby, we also work in Slack (1 mile south), Uppertown (1 mile north-west), Alicehead (1 mile north), Lumsdale (2 miles south-west) and Tansley (3 miles south). We also work in nearby towns such as Chesterfield (5 miles north-east), Belper (10 miles south), Heanor (13 miles south-east), Dronfield (9 miles north), Ripley (10 miles south-east) and Bolsover (10 miles north-east).

What’s near Brockhurst

We visit homes around Highfields School, Ashover Primary School and Church of All Saints, among other places. The closest station to Brockhurst is Matlock station, about 3.5 miles south-west. Well-known places in the area include Whitworth Hospital (3.5 miles south-west) and The Working Carriage Museum (3.9 miles west). For a walk, there is Beeley Moor.

Map of Brockhurst © OpenStreetMap contributors

Bath resealing at your home in Brockhurst

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Typical jobs include mould you can’t clean out and gaps in the seal, across basins & vanity units, wet rooms and baths.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Technician in a mask working on a freestanding roll-top bath
Area
Brockhurst (S45)
Area hub
Derbyshire
Cover
One year on every repair
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Brockhurst

  • Same prices wherever you are
  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • Dust sheets down, tidy finish

Take a look at our pricing.

Your questions about bath resealing in Brockhurst

Is there a guarantee?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair something that’s been repaired before?

Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.

How do I get a price for bath resealing in Brockhurst?

Every job gets a fixed quote from your photos. Send a close-up and a photo of the whole item with your S45 postcode.

How long does silicone take to cure?

We will give you the curing time.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Aftercare tips

Aftercare is simple:

  • Use the extractor fan
  • Clean the sealant gently and regularly
  • Open a window after bathing
  • Reseal at the first sign of lifting

Avoid scraping the joints, and keep shampoo bottles off the joints.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

What bath resealing costs

We give every job a fixed price from photos. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off

Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • The material, if you know it
  • Natural light rather than flash
  • A clear, close picture of the problem area
  • Where you are, by postcode

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

The process

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes around two hours for most jobs. We leave the room clean and ready to use once it has cured.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access

Getting a price

Email us a photo of the damage and a wider shot of the entire item, and tell us you are in Brockhurst, and we will reply with a fixed quote.

Get a fixed quote

Related advice

What we are called out for in Brockhurst

Most reseals are because of black mould. It grows into the sealant itself, so cleaning can’t get it all out.

It’s worth getting a quote if you see:

  • Black spots in the silicone
  • Silicone coming away from the tiles
  • Gaps by the taps
  • Old sealant that looks dirty

What to look for in a quote

  • What aftercare is recommended
  • What protection goes down before work starts
  • Is the price fixed, and does it include VAT?
  • If travel is included in the price

10 questions to ask before booking

Landlords, agents and businesses in Brockhurst

Landlords, letting agents and housing providers in Brockhurst use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Materials and what they mean for the repair

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, for the same reason.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Tiles that move, until they’re refixed
  • Rotten walls or floors behind the bath
  • Very wide gaps that need a trim

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Brockhurst

  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.