Hampshire · England
Bath Resealing in Soldridge
Bath resealing for Soldridge, without a refit. Send us photos for a fixed price, then book a visit.
- Black mould in the sealant
- A messy previous reseal
- Discoloured, yellow sealant
Where we work around Soldridge
Soldridge is about 5 miles south-west of Alton, in Hampshire. Our technicians come to clients in Soldridge and nearby villages, so there is no workshop to go to. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 50 miles away.
Here we cover the GU34 postcode area. That includes homes on Upper Soldridge Road, Rookwood Lane and Soldridge Road. We also cover the places around Soldridge: Medstead (1 mile north-east), Four Marks (1 mile east), South Town (1 mile north), Hattingley (2 miles north) and New Copse (2 miles north). We also work in nearby towns such as Basingstoke (11 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Fleet (15 miles north-east), Horndean (14 miles south) and Alton (5 miles north-east).
Around Soldridge
Around Soldridge, we work in homes near Church of the Good Shepherd. Well-known places in the area include Alton Community Hospital (4.1 miles north-east) and Barton Castle (2.7 miles north-west). Green spaces nearby include Red Hill.
How we handle bath resealing in Soldridge
All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We work on basins & vanity units, baths and wet rooms, and common reasons people contact us are black spots in the silicone and missing sealant behind the taps.
Whatever the size of the job, it’s backed by a one-year guarantee in Soldridge and across Hampshire.
- Location
- Soldridge (GU34)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath resealing in Soldridge
Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.
People usually call us when they notice something like this:
- Silicone smeared on tiles
- Damp near the bath
- Sealant that’s split or lifting
- Black mould in the sealant
What your quote should include
- Who will actually do the work
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
Nearby places to Soldridge
Also in Soldridge
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Let steam out after showers
- Wipe the joints dry after use
- Replace the seal when mould sets in
- Ventilate the bathroom well
Avoid scraping the joints, and keep shampoo bottles off the joints.
Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Tiles that move, until they’re refixed
- A bath or tray that moves, until its support is fixed
- Rotten walls or floors behind the bath
If in doubt, send pictures and we will say what we think.
What we work on
- Wet rooms
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
What bath resealing costs
There’s no area surcharge for Soldridge. What changes the price is:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How many areas need work
- The type of damage
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- One picture of the entire bath or shower
- A close-up of the damage, in focus
- Something in shot to show the size
- Daylight if possible, and no flash reflection
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for about two hours for a bath from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job.
Read more
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Landlords, letting agents and housing providers in Soldridge use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, so the joint is at its widest.
Why reseal now?
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No extra charge for your area
- Free fixed quotes from pictures
- Nothing taken out or refitted
- Normally one visit, start to finish
Read our full price list.
FAQs for Soldridge
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed price without visiting.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
