Cheshire East · England
Bath & shower resealing (mastic) in Sound, Cheshire East
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Sound and across Cheshire East. Send photos for a free, fixed quote.
- A messy previous reseal
- Old sealant that looks dirty
- Mould you cannot clean out
How we handle bath resealing in Sound
Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. We work on baths, kitchen worktops & sinks and wet rooms, and common reasons people contact us are damp near the bath and silicone smeared on tiles.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Sound (CW5)
- County
- Cheshire East
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Movement in the bath or tray
- Hollow or loose tiles
- Gaps so wide they need filling or trims before sealing
Not sure? Send photos and we will give you a straight answer.
What we work on
- Baths
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a couple of hours. If anything looks different from your pictures, we will talk to you before going ahead.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Getting a price
Most clients in Sound get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Do you need bath resealing in Sound?
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
Look out for any of the following:
- Old sealant that looks dirty
- Silicone smeared on tiles
- Missing sealant behind the taps
- Black mould in the sealant
Comparing quotes
- What preparation is included
- How the room is protected while they work
- Who will actually do the work
- Aftercare advice
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Towns and villages near Sound
Also in Sound
How to care for the repair
So the finish stays in good condition:
- Keep the joints dry
- Give the seal a regular clean
- Keep bottles off the joints
- Let steam out after showers
Good ventilation is the best protection, and wipe the joints after use.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Resealing in Sound: why it matters
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- No need to remove anything
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- One price list for the entire UK
Read our full price list.
Prices and what affects them
You will not pay by the hour. The price is based on:
- How much damage there is
- The type of damage
- Where the damage is and how we get to it
- The material and finish
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- The material, if you know it
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Sound questions
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Why does my sealant keep going mouldy?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
How long does resealing take?
Most reseals take about two hours. Leave it to cure before use.
How do I get a price for bath resealing in Sound?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
When can I use the bath after resealing?
We will give you the curing time, normally around a day.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Sound.
Do the materials smell?
There may be a mild smell during the work.
Where we work around Sound
Sound is about 3 miles south-west of Nantwich, in Cheshire East. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Sound is one of 254 places in Cheshire East we cover. Our jobs stretch from Sound to Liverpool (about 30 miles away).
All of CW5 is covered, from the main roads to the quietest streets. Jobs here include addresses on Whitchurch Road, Mickley Hall Lane and Heatley Lane. We also travel to Broomhall Green (1 mile south), Aston by Wrenbury (1 mile south-west), Wrenbury Heath (1 mile west), Aston (1 mile south-west) and Hack Green (1 mile east). Further out, we also cover Crewe (7 miles north-east), Nantwich (3 miles north-east), Middlewich (12 miles north-east), Sandbach (12 miles north-east), Coppenhall (7 miles north-east) and Holmes Chapel (15 miles north-east).
What’s near Sound
Typical jobs here are in homes near Sound and District Primary School and the streets around them. Sound’s nearest station is Wrenbury station, roughly 1.6 miles west. Other landmarks nearby include Nantwich Workhouse (3.8 miles north-east) and Nantwich Castle (3.1 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
