Somerset · England

Bath & shower resealing (mastic) in Sparkford, Somerset

Bath resealing for Sparkford, without a refit. Send us pictures for a fixed price, then we come to you.

  • Unsealed corners
  • A messy previous reseal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Sparkford

About our bath resealing in Sparkford

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. Most jobs take a couple of hours, then it needs to cure. If you are dealing with water getting behind the bath or tray and old sealant that looks dirty, we can typically put it right.

All our work is covered by our one-year guarantee, wherever you are in Somerset.

Where
Sparkford (BA22)
Area hub
Somerset
Warranty
One year on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Where we work around Sparkford

Sparkford is about 7 miles north-east of Yeovil, in Somerset. From the centre of Sparkford to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 640 towns and villages across Somerset, from the larger towns to small villages.

Postcode districts we cover here: BA22. We regularly work on streets such as High Street, Church Road and Cherry Pie Lane and the roads around them. Nearby, we also work in South Barrow (1 mile north), Queen Camel (1 mile south-west), Eyewell (1 mile south-west), Wales (1 mile south-west) and Sutton Montis (1 mile south-east). Within a short drive, we also cover Yeovil (7 miles south-west), Wells (13 miles north), Shepton Mallet (11 miles north), Street (10 miles north-west), Glastonbury (10 miles north-west) and Crewkerne (15 miles south-west).

Local landmarks in Sparkford

Locally, our jobs take us to homes close to Church of St Mary Magdalene and Sparkford Inn, among other places. The closest station to Sparkford is Castle Cary station, roughly 4.8 miles north of the centre. Further afield, we also cover the area around Haynes Motor Museum (0.5 miles north).

Map of Sparkford © OpenStreetMap contributors

Is resealing worth it?

A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

What you get with us

  • Nothing taken out or refitted
  • We leave the room as we found it
  • A year’s guarantee on all work
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our pricing.

What we can’t put right

A repair is not always the answer, and we would rather say so up front. Repairs will not solve:

  • A bath or tray that moves, until its support is fixed
  • Water damage behind the bath that needs a builder
  • Loose tiles, which need refixing first

If in doubt, send pictures and we’ll say what we think before booking.

Materials we work on in Sparkford

  • Wet rooms
  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units

Landlord and trade work in Sparkford

If you manage property in Sparkford, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Prices and what affects them

There’s no area surcharge for Sparkford. What changes the price is:

  • How much damage there is
  • The type of damage
  • Access to the area
  • How hard the colour is to match

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

It only takes a minute to photograph the damage. Please include:

  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • The material, if you know it

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Questions from Sparkford

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does my sealant keep splitting?

Typically because the bath or tray moves. We seal baths full of water.

Do you seal over the old sealant?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

Do you cover Sparkford?

Yes, we do. We send a technician to Sparkford for every job, and the price is the same as everywhere else.

What areas do you cover?

Across the UK. Prices don’t change with location.

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, for the same reason.

Baths

We fill the bath before sealing, to open the joint fully.

How it works

Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for about two hours for a bath from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Clear the area around the damage
  • Let the surface dry out before the visit
  • Let us know about parking or access

Ask for a price

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Send pictures for a quote

Advice

Looking after it afterwards

So the finish stays in good condition:

  • Reseal at the first sign of lifting
  • Clean the sealant gently and regularly
  • Do not stand toiletries on the seal
  • Open a window after bathing

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Damp below or loose tiles need checking quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.

What we’re called out for in Sparkford

Poor ventilation speeds things up: damp hangs around, and mould grows faster.

Look out for these signs:

  • An untidy old seal
  • Mould you can’t clean out
  • Water getting behind the bath or tray
  • Gaps in the seal

What your quote should include

  • Whether the price is fixed and includes VAT
  • What prep work is covered
  • How your room will be protected
  • What the guarantee covers, and for how long

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.