Shropshire · England
Bath Resealing in St Martins
Local bath resealing for St Martins: a fixed quote from photos, a tidy visit and a one-year guarantee.
- An untidy old seal
- Mould you can’t clean out
- Silicone coming away from the tiles
How we handle bath resealing in St Martins
We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. We’re frequently asked to fix mould you can’t clean out and silicone coming away from the tiles, across shower trays & enclosures, kitchen worktops & sinks and baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- St Martins (SY11, SY10)
- County
- Shropshire
- Guarantee
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath resealing in St Martins?
Even good sealant eventually discolours. Steam, soap and movement all wear it down.
Most people contact us when they notice something like this:
- Discoloured, yellow sealant
- Missing sealant behind the taps
- Silicone smeared on tiles
- Sealant that is split or lifting
What to look for in a quote
- If travel is included in the price
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- Aftercare advice
Also in St Martins
What affects the price in St Martins
There is no charge for travel to St Martins. The price depends on:
- The colour and finish to match
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Resealing in St Martins: why it matters
Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Fixed prices from your photos
- We come to you, anywhere in the UK
- We leave the room as we found it
- One-year guarantee on every repair
Take a look at our pricing.
Repairs by material
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Water damage behind the bath that needs a builder
- Very wide gaps that need a trim
- A flexing bath
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
Questions from St Martins
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What does bath resealing cost?
Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
How long does silicone take to cure?
You’ll get the curing time from us, typically around a day.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Clean the sealant gently and regularly
- Store bottles on a shelf
- Run the extractor fan during and after showers
- Reseal when black spots will not clean off
Leave the sealant to cure for the time we give you, usually around 24 hours.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
Where we work around St Martins
St Martins is about 5 miles north-east of Oswestry, in Shropshire. We travel to homes and businesses in St Martins, so you do not need to take anything anywhere. We work in 433 places in Shropshire. We work right across the region, from St Martins to Liverpool (about 34 miles away).
Every address in SY11 and SY10 is covered, from the main roads to the quietest streets. From Green Lane, Ifton Fields and Cedar Close or anywhere nearby, a technician can come to you. Close by, we cover Rhyn (1 mile west), Gledrid (2 miles west), Rhoswiel (2 miles west), Rhewl (2 miles south-west) and Chirk Bank (2 miles west). Further out, we also cover Oswestry (5 miles south-west), Whitchurch (14 miles east), Wem (13 miles east), Ellesmere (5 miles east), Baschurch (11 miles south-east) and Bomere Heath (14 miles south-east).
Local landmarks in St Martins
Our clients here include homes close to St Martin's School and Church of St Martin. The nearest railway station is Gobowen station, about 2.4 miles south-west. A little further out are Park Hall Countryside Experience (3.4 miles south) and Chirk Community Hospital (2.4 miles north-west). Open spaces near St Martins include The Lake and Chirk Green Hill.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a couple of hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Ensure the room can be ventilated
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
