Norfolk · England
Bath Resealing for Stanhoe homes
Bath resealing for Stanhoe, without a refit. Send us pictures for a fixed quote, then we come to you.
- Discoloured, yellow sealant
- Black mould in the sealant
- Water getting behind the bath or tray
About Stanhoe
Stanhoe is about 15 miles north-east of King's Lynn, in Norfolk. We travel to customers in Stanhoe, so you do not need to take anything anywhere. Stanhoe is one of 797 places in Norfolk we cover.
Postcode districts we cover here: PE31. Whether you live on Station Road, Cross Lane and Docking Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Docking (2 miles west), North Creake (3 miles east), Syderstone (3 miles south-east), South Creake (4 miles east) and Great Bircham (4 miles south-west). We also work in nearby towns such as King's Lynn (15 miles south-west), Fakenham (8 miles south-east), Hunstanton (8 miles west), Fairstead (14 miles south-west), Heacham (8 miles west) and North Lynn (15 miles south-west).
What’s near Stanhoe
Typical jobs here are in homes near Church of All Saints.
Bath resealing in Stanhoe without replacing anything
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why so many DIY reseals peel. We are frequently asked to fix unsealed corners and old sealant that looks dirty, on shower trays & enclosures, kitchen worktops & sinks and baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Area
- Stanhoe (PE31)
- County
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When we’d advise against a repair
It helps to know what we cannot do:
- A bath or tray that moves, until its support is fixed
- Loose tiles, which need refixing first
- Gaps too big for silicone alone
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Baths
Prices and what affects them
A fixed quote means you know the cost before you book. We look at:
- The material
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How much damage there is
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- The material, if you know it
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Natural light rather than flash
Email us photos of the damage and one of the entire item, with your PE31 postcode, and we will reply with a fixed quote.
Keeping it looking good
To keep it looking its best:
- Keep the joints dry
- Don’t stand toiletries on the seal
- Give the seal a regular clean
- Use the extractor fan
Avoid scraping the joints, and keep shampoo bottles off the joints.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for around two hours. Before leaving, we tell you how long to leave it and how to care for it.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Let us know about parking or access
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say straight away whether it can be repaired.
Advice
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, so the joint is at its widest.
What else we do in Stanhoe
Stanhoe: your questions answered
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you come to Stanhoe?
Yes. We cover the whole UK and travel to Stanhoe. Send us photos for a fixed quote, or call 0345 017 0787.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
Do you cover the whole of Norfolk?
We work UK-wide. Prices don’t change with location.
How long does a reseal take?
Most reseals take about two hours. Leave it to cure before use.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
What we’re called out for in Stanhoe
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
Keep an eye out for these signs:
- Old sealant that looks dirty
- Gaps in the seal
- Damp near the bath
- Black spots in the silicone
Before you book anyone
- How changes to the job are handled
- When it can be used again
- Aftercare advice
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
