County Durham · England
Bath & shower resealing (mastic) in Stanhope, County Durham
Bath, shower and sink resealing with new mould-resistant silicone in Stanhope, carried out at your home and guaranteed for a year.
- Unsealed corners
- Black mould in the sealant
- Gaps in the seal
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Bath resealing at your home in Stanhope
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. We work on wet rooms, shower trays & enclosures and basins & vanity units, and the jobs we see most are silicone smeared on tiles and black mould in the sealant.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Stanhope (DL13)
- Region
- County Durham
- Cover
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath resealing in Stanhope
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you seal over the old sealant?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
How do I get a price for bath resealing in Stanhope?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Keeping it looking good
Aftercare is simple:
- Give the seal a regular clean
- Reseal at the first sign of lifting
- Use the extractor fan
- Wipe the joints dry after use
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
Baths are resealed with water in them, so the joint is at its widest.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow around two hours. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
About Stanhope
Stanhope is about 10 miles south-west of Consett, in County Durham. Clients in Stanhope get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 329 towns and villages across County Durham, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 22 miles away.
Postcode districts we cover here: DL13. We regularly work on streets such as Market Place, High Street and Front Street and the roads around them. You’ll find Stanhope on the A689 and B6278, so it’s easy for us to reach. We also travel to Unthank (1 mile south), Shittlehope (1 mile south-east), Crawleyside (1 mile north), Bridge End (2 miles south-east) and Frosterley (2 miles south-east). Larger places within reach include Consett (10 miles north-east), Bishop Auckland (15 miles south-east), Stanley (15 miles north-east), Crook (11 miles east), Annfield Plain (13 miles north-east) and Barnard Castle (14 miles south).
What’s near Stanhope
Our customers here include homes close to Phoenix Inn, Church of St Thomas and Stanhope Barrington CofE Primary School and the streets around them. Green spaces nearby include Collier Law.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in County Durham and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Stanhope
What else we do in Stanhope
What bath resealing costs
Prices are worked out job by job, from your pictures. What matters most is:
- How many items we do on one visit
- Access to the area
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A close-up of the damage, in focus
- Natural light rather than flash
- A wider photo showing the whole bath or shower
- The material, if you know it
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Why it’s worth resealing in Stanhope
Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Stanhope customers choose us
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
- Fixed prices from your photos
See our pricing.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Rotten walls or floors behind the bath
- A bath or tray that moves, until its support is fixed
- Gaps so wide they need filling or trims before sealing
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
About our accreditations · Every repair comes with a one-year guarantee.
