Lincolnshire · England

Bath & shower resealing (mastic) in Stenigot, Lincolnshire

Bath resealing across Stenigot and nearby, done in a single visit in most cases.

  • Leaks at the edges
  • Gaps by the taps
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Stenigot?

How to look after the repair

Looking after the surface is easy, and it makes a real difference:

  • Run the extractor fan during and after showers
  • Clean the joints with a mild cleaner
  • Air the room after use
  • Don’t stand toiletries on the seal

Let it cure fully before using the bath or shower, typically around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we’ll say if you need a builder or plumber.

About our bath resealing in Stenigot

All of the old sealant is cut out, treat any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Typical jobs include an untidy old seal and mould you can’t clean out, across kitchen worktops & sinks, wet rooms and basins & vanity units.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.

Where
Stenigot (LN11)
County
Lincolnshire
Cover
A year, on every repair
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Materials and what they mean for the repair

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

The process

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes around two hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Let us know if it has been repaired before
  • Let us know about parking or access
  • Point us to the nearest place to park

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Read more

Landlords, agents and businesses in Stenigot

We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Questions from Stenigot

What happens after I send photos?

You get a fixed quote and available dates. If we need another angle, we will ask.

How much does bath resealing cost in Stenigot?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Will the price change on the day?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do you seal over the old sealant?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Do the materials smell?

There can be some smell while we work. It fades as everything cures.

How long does resealing take?

Usually a couple of hours, plus curing time.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Very wide gaps that need a trim
  • Tiles that move, until they’re refixed
  • Hidden water damage

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths

Where we work around Stenigot

Stenigot is about 6 miles south-west of Louth, in Lincolnshire. From the centre of Stenigot to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 732 places in Lincolnshire. Our jobs stretch from Stenigot to Leeds (68 miles away).

Our repair technicians cover all of LN11 and the streets around it. We also cover the places around Stenigot: Goulceby (1 mile south), Asterby (1 mile south), Cawkwell (2 miles south-east), Donington on Bain (2 miles north-west) and Scamblesby (2 miles south-east). Further out, we also cover Louth (6 miles north-east), New Waltham (15 miles north), Horncastle (7 miles south), Mablethorpe (15 miles east), Woodhall Spa (12 miles south) and Market Rasen (11 miles north-west).

What’s near Stenigot

Around Stenigot, we work in homes near Church of St Nicholas, among other places. Well-known places in the area include County Hospital Louth (5.9 miles north-east) and Benniworth Castle (3.1 miles west). Open spaces near Stenigot include Juicetrump Hill.

Map of Stenigot © OpenStreetMap contributors

What bath resealing costs

You will not pay by the hour. The price is based on:

  • Where the damage is and how we get to it
  • What kind of damage it is
  • Doing more than one item at once
  • The material

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your pictures

A couple of clear pictures is all it takes. Try to include:

  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • Any details about the material
  • Good light, ideally daylight, without flash glare

If you’re in Stenigot and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

Do you need bath resealing in Stenigot?

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

Most people get in touch after spotting one of these:

  • A messy previous reseal
  • Water getting behind the bath or tray
  • Gaps in the seal
  • Old sealant that looks dirty

Questions to ask before booking

  • The length of the guarantee and what it covers
  • Who will actually do the work
  • How long it needs to cure
  • Is the price fixed, and does it include VAT?

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.