Lincolnshire · England
Bath Re-enamelling for Stenigot homes
Our technicians come to Stenigot for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before you book. We take into account:
- The colour and finish to match
- The material
- Whether old repairs or coatings need taking off
- Access to the area
We charge the same wherever you are, so there’s no premium for Stenigot. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Bath re-enamelling in Stenigot without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair cast iron baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are a roll-top that’s seen better days and chips and rust in more than one place.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Stenigot (LN11)
- Area hub
- Lincolnshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We will say straight away if a repair is the right fix.
Read more
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- One price list for the entire UK
Read our prices page and bath cost comparison.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Your questions about bath re-enamelling in Stenigot
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep suction mats out of the bath
- Store bottles off the bath
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Stenigot and nearby
Stenigot is about 6 miles south-west of Louth, in Lincolnshire. Customers in Stenigot get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Stenigot is one of 732 towns and villages in Lincolnshire where we work. We work right across the region, from Stenigot to Leeds (68 miles away).
Postcode districts we cover here: LN11. We also cover the places around Stenigot: Goulceby (1 mile south), Asterby (1 mile south), Cawkwell (2 miles south-east), Donington on Bain (2 miles north-west) and Scamblesby (2 miles south-east). Larger places within reach include Louth (6 miles north-east), New Waltham (15 miles north), Horncastle (7 miles south), Mablethorpe (15 miles east), Woodhall Spa (12 miles south) and Market Rasen (11 miles north-west).
Around Stenigot
Our customers here include homes close to Church of St Nicholas and the streets around them. Well-known places in the area include County Hospital Louth (5.9 miles north-east) and Benniworth Castle (3.1 miles west). For a walk, there’s Juicetrump Hill.
Signs you need bath re-enamelling in Stenigot
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
The things clients normally mention when they call include:
- Several chips and rust patches
- An old resurfacing that is failing
- Staining under the taps and around the waste
- An outdated colour you’d like to change
What your quote should include
- What preparation is included
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Also near Stenigot
More services for Stenigot
About our accreditations · Every repair comes with a one-year guarantee.
