Norfolk · England
Bath Resealing in Stow Bedon
Bath resealing in and around Stow Bedon: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Unsealed corners
- Black spots in the silicone
- A messy previous reseal

Stow Bedon and nearby
Stow Bedon is about 6 miles west of Attleborough, in Norfolk. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 797 towns and villages in Norfolk, from the larger towns to small villages.
Jobs in NR17 work the same way as everywhere else we cover. Close by, we cover Caston (1 mile north), Northacre (1 mile north), Breckles (1 mile south), Griston (2 miles north) and Thompson (2 miles west). Further out, we also cover Thetford (9 miles south-west), Dereham (11 miles north), Wymondham (11 miles east), Attleborough (6 miles east), Watton (3 miles north-west) and Hethersett (14 miles east).
What’s near Stow Bedon
Around Stow Bedon, we work in homes near Caston Church of England Voluntary Aided Primary School, Red Lion Public House and Church of St Botolph, among other places. A little further out are Bickley Day Hospital (5.9 miles east) and Museum 4 Watton (3.6 miles north-west). Not far away are Scoulton Mere and Thompson Water.
Bath resealing in Stow Bedon without replacing anything
Baths are resealed with water in them, so the joint opens fully, so the seal does not tear when the bath is first used. Typical jobs include gaps by the taps and stained silicone, on wet rooms, shower trays & enclosures and basins & vanity units.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Stow Bedon (NR17)
- County
- Norfolk
- Cover
- One year on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Do you need bath resealing in Stow Bedon?
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
These are the problems we are asked about most:
- Black mould in the sealant
- Water getting behind the bath or tray
- Silicone coming away from the tiles
- Unsealed corners
What your quote should include
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
- Aftercare advice
- Whether the price covers travel
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Is resealing worth it?
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- One-year guarantee on every repair
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
Take a look at our prices page.
What a repair can’t fix
Some jobs are not right for a repair, for example:
- Water damage behind the bath that needs a builder
- A flexing bath
- Loose tiles, which need refixing first
If in doubt, send photos and we will say what we think.
Materials we work on in Stow Bedon
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
What else we do in Stow Bedon
How we price bath resealing
Each job gets its own fixed quote. These are the things that affect it:
- Access to the area
- How hard the colour is to match
- How much damage there is
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- The material, if you know it
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Aftercare tips
So the finish stays in good condition:
- Wipe the joints dry after use
- Replace the seal when mould sets in
- Store bottles on a shelf
- Ventilate the bathroom well
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Your questions about bath resealing in Stow Bedon
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Do you come to Stow Bedon?
Yes, we do. We send a technician to Stow Bedon for every job, with no extra charge for travel.
How long does silicone take to cure?
Normally about a day later. We confirm before we leave.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Are there extra charges for Stow Bedon?
We do not add a call-out fee. Your fixed quote includes everything.
My seal keeps tearing. Why?
Typically because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.
How it works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a couple of hours, and you are welcome to carry on with your day while we work.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

