Isle of Anglesey · Wales
Bath & shower resealing (mastic) in Stryd, Isle of Anglesey
Our technicians come to Stryd for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Old sealant that looks dirty
- Leaks at the edges
- Mould you cannot clean out
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Bath resealing in Stryd without replacing anything
Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. Our technicians work on kitchen worktops & sinks, basins & vanity units and baths, and common reasons people contact us are missing sealant behind the taps and silicone coming away from the tiles.
Every repair is covered by our one-year guarantee, wherever you are in Isle of Anglesey.
- Area
- Stryd (LL65)
- Area hub
- Isle of Anglesey
- Warranty
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Stryd
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
When can I use the bath after resealing?
We’ll give you the curing time, normally around a day.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Isle of Anglesey.
Why does mould come back so fast?
Damp is the cause. Ventilation and drying keep it clean longer.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
Stryd and nearby
Stryd is about 1 mile south-west of Holyhead, in Isle of Anglesey. Our technicians come to homes and businesses in Stryd and nearby villages, so nothing has to leave your home. Our technicians cover all 115 towns and villages across Isle of Anglesey, from the larger towns to small villages. Our jobs stretch from Stryd to Liverpool (71 miles away).
Postcode districts we cover here: LL65. Whether you live on Plas Road, Gors Avenue and King's Road or a nearby road, a technician can come to you. Stryd sits on or near the A5154, so getting to you is simple. Nearby, we also work in Holyhead (1 mile north-east), Pont-Hwfa (1 mile north-west), Blackbridge (1 mile east), Porth-y-Felin (1 mile north) and Isle of Anglesey (1 mile south-east). Further out, we also cover Llangefni (14 miles east), Amlwch (14 miles north-east), Valley (3 miles south-east), Rhosneigr (7 miles south-east), Pencraig (14 miles east) and Cemaes (11 miles north-east). Stryd is among the bigger towns we cover in Isle of Anglesey.
Near you in Stryd
Our customers here include homes close to Saint Mary's Church, Chester Inn and Ysgol Santes Fair. Stryd has its own railway station: Holyhead station. Other landmarks nearby include Stanley Sailors' Hospital (0.5 miles north-east) and Caer Gybi (0.5 miles north-east). Green spaces nearby include South Stack Cliffs RSPB reserve and Tre-wilmot.
Different materials, different repairs
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a couple of hours. We leave the room clean.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Let us know which floor the room is on
Getting a price
Send us a picture of the damage and a wider shot of the entire item, with your LL65 postcode, and we’ll come back with a fixed quote.
Read more
What we are called out for in Stryd
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
These are the problems we’re asked about most:
- An untidy old seal
- Black spots in the silicone
- Sealant that’s split or lifting
- Unsealed corners
What to look for in a quote
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
- How soon you can use it again
- Whether they match the colour on site
Towns and villages near Stryd
What else we do in Stryd
When we’d advise against a repair
It helps to know what we can’t do too:
- Hidden water damage
- Tiles that move, until they’re refixed
- A flexing bath
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Shower trays & enclosures
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- Work done at your home or business
- Typically one visit, start to finish
See our full price list.
What affects the price in Stryd
We charge the same across the UK, including Stryd. What changes the price is:
- What kind of damage it is
- Whether we combine several jobs
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your photos
We price nearly every job from photos. This is what we need:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
How to care for the repair
Looking after the surface is easy:
- Wipe the joints dry after use
- Reseal at the first sign of lifting
- Ventilate the bathroom well
- Keep bottles off the joints
Leave the sealant to cure for the time we give you, normally about a day.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
