Hampshire · England

Bath & shower resealing (mastic) in Test Valley, Hampshire

Bath, shower and sink resealing with new mould-resistant silicone at your home in Test Valley, with a one-year guarantee on every repair.

  • Gaps by the taps
  • Damp near the bath
  • Mould you cannot clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Test Valley

Common problems we fix in Test Valley

Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.

Keep an eye out for any of the following:

  • An untidy old seal
  • Silicone coming away from the tiles
  • Black spots in the silicone
  • Unsealed corners

Comparing quotes

  • How the room is protected while they work
  • Whether cleaning and preparation are in the price
  • Whether the colour is mixed to match
  • What aftercare is recommended

Our hiring checklist

Bath resealing in Test Valley, done in place

Baths are resealed with water in them, so the joint opens fully, so the seal doesn’t tear when the bath is first used. We work on shower trays & enclosures, basins & vanity units and kitchen worktops & sinks, and people most often call us about a messy previous reseal and unsealed corners.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Where
Test Valley (SP11)
Region
Hampshire
Cover
One year on every repair
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Repairs by material

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

Baths are resealed with water in them, so the joint is at its widest.

What we can’t put right

A repair is not always the answer, and we’d rather say so up front. We cannot fix:

  • Water damage behind the bath that needs a builder
  • Very wide gaps that need a trim
  • Tiles that move, until they’re refixed

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms

Common questions in Test Valley

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Test Valley.

Can I add another job to the visit?

Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.

How do I book?

Use the quote form or ring 0345 017 0787, and we’ll do the rest.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Do you work in Test Valley?

Yes. We work across the UK and travel to Test Valley. Send us pictures for a fixed quote, or call 0345 017 0787.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How we price bath resealing

We give every job a fixed price from pictures. This is what makes a difference:

  • The colour and finish to match
  • The type of damage
  • Whether old repairs or coatings need taking off
  • How many areas need work

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • Natural light rather than flash

The quickest way to a price is to send two or three photos using our quote form or call us. We will say right away whether it can be repaired.

Where we work around Test Valley

Test Valley is about 7 miles north of Andover, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Test Valley is one of 683 places in Hampshire where we work. You can also see our page for London, about 59 miles away.

All of SP11 is covered. We also travel to Ashmansworth (1 mile east), Vernham Street (3 miles west), Upper Green (4 miles north), Inkpen Common (5 miles north) and Hell Corner (5 miles north). We also work in nearby towns such as Basingstoke (15 miles east), Andover (7 miles south), Tadley (13 miles east), Popley (15 miles east), Tidworth (11 miles south-west) and Kempshott (13 miles east).

What’s near Test Valley

Typical jobs here are in homes near Church of St James. For a walk, there’s Pilot Hill.

Map of Test Valley © OpenStreetMap contributors

Why it’s worth resealing in Test Valley

Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. We remove the old sealant completely. We charge the same wherever you are, so there is no premium for Test Valley. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Most jobs done in one visit
  • No extra charge for your area
  • Everything repaired in place
  • Every repair guaranteed for a year

See our prices page.

Aftercare tips

A little care keeps the finish looking good. Our advice:

  • Clean the sealant gently and regularly
  • Air the room after use
  • Reseal at the first sign of lifting
  • Wipe the joints dry after use

Keep the room well ventilated, and wipe the joints after use so mould struggles to take hold.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

What we do, step by step

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a couple of hours for most jobs. The room is left tidy and ready to use once it has cured.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Let us know which floor the room is on
  • Let us know about parking or access
  • Let us know if it has been repaired before

Getting a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.