West Sussex · England

Bath & shower resealing (mastic) in Tilgate, West Sussex

Bath resealing in Tilgate without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Missing sealant behind the taps
  • Damp near the bath
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Tilgate homes

Do you need bath resealing in Tilgate?

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.

You may need us if you’ve spotted:

  • Old sealant that looks dirty
  • Black spots in the silicone
  • Silicone smeared on tiles
  • Silicone coming away from the tiles

Before booking anyone

  • Whether the price covers travel
  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • What preparation is included

Our hiring checklist

About our bath resealing in Tilgate

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. We’re often asked to fix gaps in the seal and black mould in the sealant, in shower trays & enclosures, kitchen worktops & sinks and wet rooms.

Big or small, you get the same one-year guarantee in Tilgate and across West Sussex.

Area
Tilgate (RH10, RH11)
Region
West Sussex
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Is resealing worth it?

Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • A fixed quote before you book
  • A year’s guarantee on all work
  • We leave the room as we found it
  • Work done at your home or business

See our pricing.

What happens on the day

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a couple of hours, and we leave the room as we found it.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Keep a parking space free if you can
  • Open a window if you can
  • Move bottles, mats and clutter away from the area

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote the same day in most cases.

Get a fixed price

Read more

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Open a window after bathing
  • Store bottles on a shelf
  • Replace the seal when mould sets in
  • Use the extractor fan

Let it cure fully before using the bath or shower, normally about a day.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

What affects the price in Tilgate

We do not charge extra for travel to Tilgate. The price comes down to:

  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • The colour and finish to match
  • The size and number of damaged areas

We charge the same wherever you are, so there is no premium for Tilgate. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Getting a price from photos

We price nearly every job from photos. This is what to send:

  • A coin or ruler next to the damage for scale
  • A wider photo showing the whole bath or shower
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Common questions in Tilgate

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we will plan for it.

What information do you need?

Use the quote form or ring 0345 017 0787.

Why does my sealant keep splitting?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you come to Tilgate?

Yes. We cover the whole UK and come to Tilgate. Send photos and we’ll quote, or call 0345 017 0787.

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • A flexing bath
  • Tiles that move, until they’re refixed
  • Very wide gaps that need a trim

Send us pictures and we will tell you honestly.

What we work on

  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms

Different materials, different repairs

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

We fill the bath before sealing, to open the joint fully.

Landlord and trade work in Tilgate

We work for landlords, letting agents and housing providers in Tilgate as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

About Tilgate

Tilgate is about 1 mile south-east of Crawley, in West Sussex. Anywhere in RH10, we carry out the work at your property. We cover all 371 towns and villages in West Sussex, from the larger towns to small villages. Our nearest city page is London, about 28 miles away.

All of RH10 and RH11 is covered, from the main roads to the quietest streets. Whether you live on York Road, Nash Road and Cook Road or anywhere nearby, we can come to you. Nearby, we also work in Southgate (1 mile west), Crawley (1 mile north-west), Three Bridges (1 mile north-east), Maidenbower (1 mile east) and West Green (1 mile north-west). Further out, we also cover Horsham (7 miles south-west), Haywards Heath (8 miles south-east), Burgess Hill (10 miles south), East Grinstead (7 miles east), Billingshurst (13 miles south-west) and Roffey (6 miles west).

Around Tilgate

In Tilgate, that means homes near The Grasshopper pub, The Oaks Primary School & Nursery and Three Bridges Junior School, among other places. You’ll also find Thomas Bennett Community College (0.6 miles south-west), Tilgate Park (0.7 miles south) and Holy Trinity (within half a mile south-west). Tilgate’s nearest station is Crawley station, about 0.6 miles north-west. Nearby you will also find County Mall (0.7 miles north-west) and Crawley Hospital (1.2 miles north-west). For a walk, there’s Tilgate Lake.

Map of Tilgate © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.