Pembrokeshire · Wales

Bath & shower resealing (mastic) in Townsend, Pembrokeshire

Bath resealing for Townsend, without a refit. Get a fixed price from your photos, then book a visit.

  • Silicone smeared on tiles
  • Gaps in the seal
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Townsend

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Townsend use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

How we handle bath resealing in Townsend

We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours, plus curing time. We work on baths, basins & vanity units and wet rooms, and people most often call us about gaps by the taps and sealant that’s split or lifting.

Big or small, you get the same one-year guarantee.

Location
Townsend (SA62)
Area hub
Pembrokeshire
Cover
12 months on all our work
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Why reseal now?

Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why us?

  • We’ll tell you if it’s not worth repairing
  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited
  • Every repair guaranteed for a year

Take a look at our pricing.

Our work in Townsend

Townsend is about 6 miles west of Milford Haven, in Pembrokeshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Townsend is one of 223 places in Pembrokeshire we cover.

All of SA62 is covered, from the main roads to the quietest streets. If you are just outside Townsend, we cover Dale (1 mile south-west), St Ishmael's (2 miles north-east), Marloes (2 miles north-west), Hasguard (3 miles north-east) and Hasguard Cross (4 miles north-east). Larger places within reach include Haverfordwest (11 miles north-east), Milford Haven (6 miles east), Pembroke (11 miles east), Pembroke Dock (10 miles east), The Marsh (11 miles north-east) and Green (11 miles east).

Landmarks near Townsend

Our clients here include homes close to Church of Saint James the Great and The Griffin Inn. Nearby you’ll also find Dale Castle (0.5 miles west). Open spaces near Townsend include Brunt Farm Hill.

Map of Townsend © OpenStreetMap contributors

FAQs for Townsend

Can tenants book a repair?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

What areas do you cover?

Everywhere in the UK, Townsend included. There’s no extra charge for travel.

What happens after I send photos?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Can you redo someone else’s repair?

Generally, yes. We remove the old repair before doing a new one.

Is my repair covered?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

How do I stop mould in sealant?

Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

What does bath resealing cost?

Every job gets a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Clean the joints with a mild cleaner
  • Dry the seal after bathing
  • Store bottles on a shelf
  • Let steam out after showers

Good ventilation is the best protection, and wipe the joints after use to keep mould away.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a couple of hours. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access
  • Avoid using the area for a few hours before we arrive

Ask for a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a free quote

Read more

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

What we cannot put right

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Rotten walls or floors behind the bath
  • Gaps too big for silicone alone
  • Loose tiles, which need refixing first

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms
  • Baths

What bath resealing costs

You will not pay by the hour. The price is based on:

  • The colour and finish to match
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • How much damage there is

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send photos for a quote

It only takes a minute to photograph the damage. Try to send:

  • A close-up of the damage, in focus
  • One picture of the whole bath or shower
  • What it’s made of, if you know
  • Whether it’s been repaired or coated before

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Signs you need bath resealing in Townsend

Sealant does not last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

Send us a picture if you notice any of these:

  • Stained silicone
  • Black mould in the sealant
  • Gaps by the taps
  • Silicone coming away from the tiles

Comparing quotes

  • How soon you can use it again
  • How long the guarantee is and what it covers
  • What protection goes down before work starts
  • Aftercare advice

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.