Cornwall · England
Bath Resealing in Trembraze
Bath, shower and sink resealing with new mould-resistant silicone at your home in Trembraze, with a one-year guarantee on every repair.
- Gaps in the seal
- Discoloured, yellow sealant
- Gaps by the taps
What affects the price in Trembraze
Quotes are free and the price is fixed. What we look at:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Whether we combine several jobs
- How many areas need work
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- One picture of the whole bath or shower
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job the same day in most cases.
About our bath resealing in Trembraze
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. Most jobs take a couple of hours, then it needs to cure. Whether it’s sealant that’s split or lifting and black spots in the silicone, we can normally put it right, on kitchen worktops & sinks, shower trays & enclosures and basins & vanity units alike.
All our work is covered by our one-year guarantee, wherever you are in Cornwall.
- Location
- Trembraze (PL14)
- Area hub
- Cornwall
- Cover
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
More services for Trembraze
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes around two hours, and we finish by cleaning up and talking you through the result.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Keeping it looking good
Aftercare is simple:
- Reseal when black spots will not clean off
- Give the seal a regular clean
- Open a window after bathing
- Wipe the joints dry after use
Leave the sealant to cure for the time we give you, normally about a day.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Landlord and trade work in Trembraze
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Is resealing worth it?
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Trembraze customers choose us
- No extra charge for your area
- No need to remove anything
- One-year guarantee on every repair
- Fixed prices from your photos
Take a look at our prices page.
About Trembraze
Trembraze is about 1 mile north of Addington, in Cornwall. Anywhere in PL14, we carry out the work at your property. We work in 644 places across Cornwall, from the larger towns to small villages.
Our visits in PL14 work the same way as everywhere else we cover. Jobs here include addresses on Kibble Road, Pippin Avenue and Craddock Avenue. Other places close to Trembraze include Addington (1 mile south), Hendrabridge (1 mile east), Liskeard (1 mile south-west), Merrymeet (1 mile east) and Lamellion (1 mile south-west). Within a short drive, we also cover Stonehouse (14 miles south-east), Bodmin (12 miles west), Saltash (11 miles east), Launceston (13 miles north), Looe (7 miles south) and Torpoint (13 miles south-east).
Near you in Trembraze
We visit homes around St Martin's Church, Liskeard School and Community College and The Barley Sheaf Public House and the streets around them. The nearest railway station is Liskeard station, about 1.3 miles south-west. Further afield, we also cover the area around Liskeard and District Museum (0.7 miles south-west) and Caradon (0.9 miles south-west). Green spaces nearby include Caradon Hill.
When we would advise against a repair
Before booking, it’s worth knowing the limits:
- Gaps so wide they need filling or trims before sealing
- A flexing bath
- Loose tiles, which need refixing first
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Baths
Your questions about bath resealing in Trembraze
Which areas do you work in?
The entire UK, including all of Cornwall. Just include your postcode and we will confirm dates.
Are there extra charges for Trembraze?
Travel is included in the price, and we charge the same wherever you are.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you seal over the old sealant?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
What does bath resealing cost?
Every job gets a fixed price from your pictures. Send a close-up and a photo of the whole item with your PL14 postcode.
Why does mould come back so fast?
Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Do you need bath resealing in Trembraze?
Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.
Customers usually contact us about:
- Stained silicone
- Black mould in the sealant
- Silicone coming away from the tiles
- Leaks at the edges
What your quote should include
- How soon you can use it again
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
