Cornwall · England
Bath Resealing for Treviscoe homes
Bath, shower and sink resealing with new mould-resistant silicone at your home in Treviscoe, with a one-year guarantee on every repair.
- Silicone coming away from the tiles
- Unsealed corners
- Stained silicone
When we would advise against a repair
We won’t take on work that will not last, so these are the limits:
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
- Gaps too big for silicone alone
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
About our bath resealing in Treviscoe
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. Common call-outs are for old sealant that looks dirty and damp near the bath, in wet rooms, kitchen worktops & sinks and basins & vanity units.
All our work is covered by a one-year guarantee, wherever you are in Cornwall.
- Area
- Treviscoe (PL26)
- County
- Cornwall
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Prices and what affects them
There is no charge for travel to Treviscoe. The price depends on:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The colour and finish to match
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- Where you are, by postcode
- One picture of the entire bath or shower
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Why it’s worth resealing in Treviscoe
Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why book with us
- One-year guarantee on every repair
- No need to remove anything
- Same prices wherever you are
- We come to you, anywhere in the UK
Read our prices page.
Our work in Treviscoe
Treviscoe is about 6 miles north-west of St Austell, in Cornwall. Clients in Treviscoe get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
Every address in PL26 is covered, from the main roads to the quietest streets. Nearby, we also work in Bodella (1 mile north-east), Hendra (1 mile north-east), St Dennis (1 mile north-east), Nanpean (1 mile east) and Goverseth (2 miles south-east). Further out, we also cover Truro (10 miles south-west), Newquay (8 miles west), St Austell (6 miles south-east), Bodmin (10 miles north-east), Sandy Bottom (6 miles east) and Bethel (6 miles east).
Local landmarks in Treviscoe
Locally, our jobs take us to homes close to Brannel School and St Dennis Primary Academy and the streets around them. For rail, the closest station is St Columb Road station, about 2.6 miles north-west. Well-known places in the area include Automobilia Motor Museum (2 miles south). Green spaces nearby include Hensbarrow Beacon and Goss Moor.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Use the extractor fan
- Keep bottles off the joints
- Replace the seal when mould sets in
- Clean the joints with a mild cleaner
Good ventilation is the best protection, and dry the joints after bathing to keep mould away.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Landlords, agents and businesses in Treviscoe
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Treviscoe use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Other services in Treviscoe
When to call us in Treviscoe
Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.
Send us a picture if you notice any of these:
- Leaks at the edges
- Mould you can’t clean out
- Old sealant that looks dirty
- Sealant that is split or lifting
Before booking anyone
- How the colour is matched
- How your room will be protected
- What prep work is covered
- If travel is included in the price
Common questions in Treviscoe
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Why does the silicone keep cracking?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow about two hours for a bath from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
