Staffordshire · England
Bath & shower resealing (mastic) in Tuppenhurst, Staffordshire
Fixed-price bath resealing in Tuppenhurst and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Unsealed corners
- Stained silicone
- Damp near the bath
What bath resealing costs
There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- What the surface is made of
- The type of damage
- Previous DIY repairs that have to come out
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Any details about the material
To get a price, send a couple of photos using our quote form or call us. We’ll say immediately whether it can be repaired.
About our bath resealing in Tuppenhurst
A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why many DIY jobs peel. Whether it’s water getting behind the bath or tray and an untidy old seal, we can usually put it right, on basins & vanity units, kitchen worktops & sinks and shower trays & enclosures alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Tuppenhurst (WS15)
- Region
- Staffordshire
- Warranty
- One year on every repair
- Quote
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath resealing in Tuppenhurst?
Joints split if the bath or tray moves, often because it was sealed with the bath empty.
The things customers normally mention when they call are:
- Water getting behind the bath or tray
- Old sealant that looks dirty
- Sealant that’s split or lifting
- Black mould in the sealant
Before you book anyone
- What happens if they find more damage
- Whether they match the colour on site
- When it can be used again
- Who will actually do the work
Towns and villages near Tuppenhurst
Also in Tuppenhurst
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- One-year guarantee on every repair
- One visit for most repairs
- CHAS and Constructionline accredited
- Same prices wherever you are
Read our pricing.
About Tuppenhurst
Tuppenhurst is about 4 miles east of Rugeley, in Staffordshire. From the centre of Tuppenhurst to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 512 places across Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 19 miles away.
Every address in WS15 is covered, from the main roads to the quietest streets. Other places close to Tuppenhurst include Handsacre (1 mile west), Armitage (1 mile west), Mavesyn Ridware (1 mile north-west), Pipe Ridware (1 mile north) and Longdon (1 mile south-west). We also work in nearby towns such as Stafford (12 miles north-west), Burton upon Trent (10 miles north-east), Tamworth (11 miles south-east), Cannock (7 miles south-west), Lichfield (4 miles south) and Rugeley (4 miles west).
What’s near Tuppenhurst
We visit homes around Church of St Nicholas, Hayes Meadow Primary School and The Crown Inn, among other places. The nearest railway station is Rugeley Town station, roughly 3.5 miles west of the centre. Well-known places in the area include Cannock Castle Ring (3.8 miles south-west) and St Matthew's Hospital (4.1 miles south). The countryside around Tuppenhurst includes Stowe Pool and George's Hayes.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
- Very wide gaps that need a trim
Send us pictures and we will tell you honestly.
What we work on
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Baths
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
What we do, step by step
We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a couple of hours, and the room is left clean and tidy.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
How to prepare
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
Getting a price
Upload pictures of the damage and a wider shot of the whole item, with your WS15 postcode, and we’ll reply with a fixed price.
Advice
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Tuppenhurst as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
FAQs for Tuppenhurst
When can I use the bath after resealing?
Normally about a day later. We will tell you the exact time.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Why does my sealant keep splitting?
Usually because the bath or tray moves. We fill the bath before sealing it.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I stop mould in sealant?
Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Tuppenhurst.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
