Greater London · England
Bath & shower resealing (mastic) in Victoria, Greater London
Bath resealing in Victoria without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Missing sealant behind the taps
- Old sealant that looks dirty
- Silicone smeared on tiles
What bath resealing costs
Quotes are free and the price is fixed. What we look at:
- How much damage there is
- The material
- What kind of damage it is
- Where the damage is and how we get to it
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Phone photos are fine. Make sure they show:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Where you are, by postcode
- The material, if you know it
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Bath resealing in Victoria, done in place
Baths are resealed with water in them, so the joint is at its widest, so the seal doesn’t tear when the bath is first used. Common call-outs are for black mould in the sealant and an untidy old seal, across kitchen worktops & sinks, wet rooms and basins & vanity units.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Victoria (SW1V, SW1P, SW1X)
- Region
- Greater London
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Covering Victoria
Victoria is about 1 mile south of City of Westminster, in Greater London. Our technicians come to clients in Victoria and nearby villages, so you don’t need to take anything anywhere. Victoria is one of 764 places in Greater London we cover.
Every address in SW1V, SW1P and SW1X is within our area. You will find streets such as Eaton Lane, Gerald Road and Wilton Road, all of which we cover. With the A202 and A302 close by, Victoria is easy for our technicians to reach. Other places close to Victoria include Belgravia (1 mile north-west), Pimlico (1 mile south-east), Westminster (1 mile north-east), Millbank (1 mile north-east) and Brompton (1 mile west). Further out, we also cover Shoreditch (4 miles north-east), Walthamstow (8 miles north-east), Hoxton (4 miles north-east), Whitechapel (4 miles north-east), Hampstead (4 miles north) and Ruislip (13 miles north-west).
Near you in Victoria
In Victoria, that means homes near Westminster City School, Westminster Cathedral Choir School and St. Michael's Church. Nearby too are Green Park (0.6 miles north), St Peter's Eaton Square CofE Primary School (within half a mile north-west), London Library (0.9 miles north) and Wetherspoons pub (within half a mile east). There is a railway station in Victoria itself: London Victoria station. Other landmarks nearby include Baynard's Castle (2.2 miles north-east) and Health Exhibition Centre (less than half a mile south-west). Not far away are Ludgate Hill and St. James's Park Lake.
- Other local spots include Westminster St Margaret and St John (0.6 miles north-east)
Questions from Victoria
When can I use the bath after resealing?
Typically after around 24 hours. We’ll tell you the exact time.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
How do I stop mould in sealant?
Generally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Which areas do you work in?
We cover the whole UK, including Victoria and the rest of Greater London. Send your postcode with your photos and we’ll offer you dates.
Signs you need bath resealing in Victoria
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
If you can see any of these, send us a picture:
- Unsealed corners
- Damp near the bath
- Stained silicone
- Black spots in the silicone
What to look for in a quote
- What preparation is included
- How the room is protected while they work
- If travel is included in the price
- How changes to the job are handled
Is resealing worth it?
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. Our prices are the same across the UK, with no extra for Victoria. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- We leave the room as we found it
- No need to remove anything
- No extra charge for your area
- Every repair guaranteed for a year
See our pricing.
Places near Victoria
What else we do in Victoria
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take about two hours for a bath.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Let us know which floor the room is on
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
Ask for a price
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Victoria, and we’ll come back with a fixed quote.
Related advice
For landlords and businesses
For anyone letting property in or around Victoria, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What we can’t put right
It helps to know what we cannot do too:
- Very wide gaps that need a trim
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
About our accreditations · Every repair comes with a one-year guarantee.
