Kent · England

Bath & shower resealing (mastic) in Waldershare, Kent

Bath resealing for Waldershare, without a refit. Send us photos for a fixed quote, then book a visit.

  • A messy previous reseal
  • Gaps in the seal
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Waldershare

Bath resealing in Waldershare, done in place

We reseal baths with them filled with water, so the joint is at its widest, so the seal doesn’t tear when the bath is first used. Common call-outs are for unsealed corners and stained silicone, on wet rooms, shower trays & enclosures and baths.

Every repair is covered by a one-year guarantee, wherever you are in Kent.

Area
Waldershare (CT15)
Region
Kent
Warranty
A year, on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Resealing in Waldershare: why it matters

Sealing over old silicone is a false economy. It soon peels, and traps mould underneath. A proper reseal removes the old first. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Same prices wherever you are
  • No need to remove anything
  • Typically one visit, start to finish

Read our prices page.

Do you need bath resealing in Waldershare?

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.

Look out for any of the following:

  • A messy previous reseal
  • Water getting behind the bath or tray
  • Unsealed corners
  • Old sealant that looks dirty

What to look for in a quote

  • How changes to the job are handled
  • How long it needs to cure
  • Whether the price covers travel
  • How to care for the finish

How to compare quotes

How the visit works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for around two hours from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Before we arrive

  • Let us know if it has been repaired before
  • Let us know which floor the room is on
  • Point us to the nearest place to park

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Get a free quote

Related advice

Waldershare: your questions answered

How long before I can shower?

Normally about a day later. We’ll tell you the exact time.

Do you come to Waldershare?

Yes. We cover the entire UK and travel to Waldershare and the rest of Kent. Send us photos for a fixed quote, or call 0345 017 0787.

Why does mould come back so fast?

Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we will plan for it.

How much does bath resealing cost in Waldershare?

Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Prices and what affects them

There are no hourly rates or hidden extras. The price depends on:

  • Access to the area
  • How many areas need work
  • The material and finish
  • The colour and finish to match

The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.

Quotes from your pictures

Most quotes are done from pictures alone. To help us price it:

  • A wider photo showing the entire bath or shower
  • The material, if you know it
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Materials and what they mean for the repair

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

What a repair can’t fix

We will not take on work that will not last, so here’s what a repair cannot put right:

  • Very wide gaps that need a trim
  • Water damage behind the bath that needs a builder
  • Tiles that move, until they’re refixed

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Baths

Waldershare and nearby

Waldershare is about 4 miles north-west of Dover, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Waldershare is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 62 miles away.

Here we cover the CT15 postcode area. We also travel to Eythorne (1 mile north-east), Coldred (1 mile south-west), Sibertswold (1 mile west), Halfway Street (2 miles west) and Lydden (2 miles south-west). We also work in nearby towns such as Canterbury (10 miles north-west), Margate (14 miles north), Dover (4 miles south-east), Folkestone (8 miles south-west), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).

Local landmarks in Waldershare

Locally, our jobs take us to homes close to Church of St Pancras, The White Horse pub and Eythorne Elvington Community Primary School, among other places. Waldershare’s nearest station is Shepherds Well station, roughly 1.3 miles west of the centre. Well-known places in the area include Buckland Hospital (4.2 miles south) and Dover Transport Museum (3 miles south-east).

Map of Waldershare © OpenStreetMap contributors

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Clean the joints with a mild cleaner
  • Run the extractor fan during and after showers
  • Replace the seal when mould sets in
  • Keep bottles off the joints

Leave the sealant to cure for the time we give you, normally about a day.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.