Flintshire · England
Bath Resealing for Wern-y-gaer homes
Fixed-price bath resealing in Wern-y-gaer and the surrounding area, typically in one visit.
- Silicone smeared on tiles
- Black mould in the sealant
- Water getting behind the bath or tray
Covering Wern-y-gaer
Wern-y-gaer is about 3 miles south-west of Flint, in Flintshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Wern-y-gaer is one of 139 places in Flintshire where we work. Our nearest city page is Liverpool, about 17 miles away.
We cover every part of CH7 and the streets around it. We also cover the places around Wern-y-gaer: Berth-ddu (1 mile north-east), Rhosesmor (1 mile south-east), Halkyn (1 mile north), Mynydd y Fflint (2 miles east) and Llan-eurgain (2 miles east). Further out, we also cover Connah's Quay (5 miles east), Buckley (5 miles south-east), Bwcle (6 miles south-east), Flint (3 miles north-east), Saltney (11 miles east) and Mold (4 miles south-east).
Around Wern-y-gaer
Around Wern-y-gaer, we work in homes near Ysgol Rhos Helyg, The Red Lion Inn and St Paul's Church. The nearest railway station is Flint station, about 3.5 miles north-east of the centre. Other landmarks nearby include Mold Community Hospital (3.4 miles south-east) and Moel-y-crio (0.7 miles north-west). For a walk, there’s Deeside Nature Reserve and Moel y Gaer.
About our bath resealing in Wern-y-gaer
A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. Whether it’s damp near the bath and discoloured, yellow sealant, we can normally put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Wern-y-gaer (CH7)
- County
- Flintshire
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
Baths are resealed with water in them, so the joint is at its widest.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep the joints dry
- Use the extractor fan
- Clean the joints with a mild cleaner
- Reseal when black spots won’t clean off
Let it cure fully before using the bath or shower, generally around 24 hours.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a couple of hours, including clearing up.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Before we arrive
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Work for landlords and builders
We work for landlords, letting agents and housing providers in Wern-y-gaer as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
If you manage property in Wern-y-gaer, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Also near Wern-y-gaer
Also in Wern-y-gaer
Wern-y-gaer: your questions answered
How long does resealing take?
Around two hours for a bath, then it needs to cure.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you reseal over the old silicone?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Do you need bath resealing in Wern-y-gaer?
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
The things customers normally mention when they call include:
- Damp near the bath
- An untidy old seal
- Missing sealant behind the taps
- Stained silicone
Questions to ask before you book
- How long it needs to cure
- What preparation is included
- Whether the price covers travel
- Aftercare advice
Why reseal now?
Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Our prices are the same across the UK, so there is no premium for Wern-y-gaer. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- One visit for most repairs
- Everything repaired in place
- Honest advice, even when it means no job
- Every repair guaranteed for a year
Take a look at our pricing.
How we price bath resealing
Every quote is fixed and free. What we take into account:
- How many items we do on one visit
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
