Flintshire · England
Bath Resealing in Connah's Quay
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Connah's Quay. Free, fixed quotes from your pictures.
- Stained silicone
- Silicone smeared on tiles
- Gaps by the taps
Bath resealing in Connah's Quay without replacing anything
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. We work on kitchen worktops & sinks, basins & vanity units and wet rooms, and common reasons people contact us are black mould in the sealant and old sealant that looks dirty.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Connah's Quay (CH5, CH6, CH7)
- Region
- Flintshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Landlord and trade work in Connah's Quay
Landlords, letting agents and housing providers in Connah's Quay use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Common questions in Connah's Quay
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can new silicone go over old?
We always remove the old sealant completely. Fresh silicone does not stick to old.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Prices and what affects them
There is no area surcharge for Connah's Quay. The price reflects:
- Unusual colours or finishes
- The material
- How many items we do on one visit
- The type of damage
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Two or three clear pictures are normally enough. Try to include:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One picture of the whole bath or shower
- A clear, close picture of the problem area
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Where we work around Connah's Quay
Connah's Quay (also: Cei Connah) is about 7 miles south-west of Ellesmere Port, in Flintshire. Anywhere in CH5, we carry out the work at your property. Our technicians cover 139 places in Flintshire, from the larger towns to small villages. You can also see our page for Liverpool, about 14 miles away.
Every address in CH5, CH6 and CH7 is covered. From Church Road, High Street and St Mark's Avenue or a nearby road, a technician can come to you. Being close to the B5126 and B5129, Connah's Quay is simple for us to get to. Nearby, we also work in Golftyn (1 mile north), Wepre (1 mile east), Kelsterton (1 mile north-west), Higher Shotton (1 mile south-east) and Shotton (1 mile east). Larger places within reach include Buckley (3 miles south), Bwcle (3 miles south), Flint (3 miles north-west), Saltney (7 miles south-east), Mold (5 miles south-west) and Holywell (8 miles north-west). Connah's Quay is among the bigger towns we cover in Flintshire.
Local landmarks in Connah's Quay
Typical jobs here are in homes near Connah's Quay High School, Wepre Park and St Mark's Church and the streets around them. Nearby too are The Redhall pub (within half a mile north-east) and Bryn Deva C.P. School (less than half a mile north-east). The nearest railway station is Shotton station, roughly 1.2 miles east of the centre. Nearby you’ll also find Buckley Library (3.3 miles south) and Deeside Community Hospital (1.4 miles south-east). For a walk, there’s Leadbrook and Deeside Nature Reserve.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
What we can’t put right
A repair isn’t right for every job, for example:
- Gaps so wide they need filling or trims before sealing
- Hollow or loose tiles
- Water damage behind the bath that needs a builder
If in doubt, send photos and we will say what we think.
Materials we work on in Connah's Quay
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
Why reseal now?
Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. We remove the old sealant completely. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why book with us
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Same prices wherever you are
Take a look at our prices page.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a couple of hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Before we arrive
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Keep the joints dry
- Give the seal a regular clean
- Don’t stand toiletries on the seal
- Run the extractor fan during and after showers
Don’t scrape the sealant with anything sharp, and do not stand bottles on the seal.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Places near Connah's Quay
What else we do in Connah's Quay
About our accreditations · Every repair comes with a one-year guarantee.
