Gloucestershire · England

Bath Resealing for Winson homes

Bath resealing in Winson without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • An untidy old seal
  • Gaps by the taps
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Winson

About our bath resealing in Winson

Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. If you are dealing with mould you can’t clean out and a messy previous reseal, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Location
Winson (GL7)
Region
Gloucestershire
Cover
A year, on every repair
Price
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How we price bath resealing

A fixed quote means you know the cost before you book. We look at:

  • Any earlier repairs that need removing first
  • The type of damage
  • What the surface is made of
  • Unusual colours or finishes

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • Where you are, by postcode
  • A clear, close picture of the problem area

Most clients in Winson get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Different materials, different repairs

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Clean the joints with a mild cleaner
  • Reseal at the first sign of lifting
  • Run the extractor fan during and after showers
  • Dry the seal after bathing

Let it cure fully before using the bath or shower, normally about a day.

Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.

Work for landlords and builders

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

Winson and nearby

Winson is about 6 miles north-east of Cirencester, in Gloucestershire. Anywhere in GL7, a technician comes to you. Winson is one of 470 towns and villages in Gloucestershire we cover. We work right across the region, from Winson to Birmingham (48 miles away).

Postcode districts we cover here: GL7. Nearby, we also work in Arlington (2 miles south-east), Bibury (2 miles south-east), Chedworth (3 miles north-west), Northleach (4 miles north) and Sunhill (4 miles south-east). We also work in nearby towns such as Cheltenham (12 miles north-west), St Paul's (12 miles north-west), Cirencester (6 miles south-west), Lansdown (12 miles north-west), Bishop's Cleeve (15 miles north-west) and Fairview (12 miles north-west).

Local landmarks in Winson

We visit homes around Church of St Michael. A little further out are Arlington Mill Museum (1.7 miles south-east).

Map of Winson © OpenStreetMap contributors

Why it’s worth resealing in Winson

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why choose Surface Doctor in Winson

  • Most jobs done in one visit
  • One-year guarantee on every repair
  • Same prices wherever you are
  • We’ll tell you if it’s not worth repairing

See our pricing.

When to call us in Winson

Most reseals are because of black mould. It grows into the sealant itself, so cleaning can’t get it all out.

Most people contact us after spotting one of these:

  • Gaps in the seal
  • Mould you can’t clean out
  • Leaks at the edges
  • Stained silicone

What your quote should include

  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • What happens if they find more damage
  • What aftercare is recommended

Choosing a repair company

FAQs for Winson

When can I use the bath after resealing?

You’ll get the curing time from us.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

How do I stop mould in sealant?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.

Can you reseal over the old silicone?

We always remove the old sealant completely. Fresh silicone doesn’t stick to old.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

What happens after I send pictures?

We come back with a fixed quote. You are under no obligation.

How long will it take?

Most reseals take about two hours. Leave it to cure before use.

What we do, step by step

The work is clean and fairly quiet. Protection goes down first, then the job itself takes a couple of hours. At the end we talk you through the curing time and the aftercare.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park
  • Make sure the room can be ventilated

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.