Kent · England
Bath & shower resealing (mastic) in Wolverton, Kent
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Wolverton and across Kent. Send photos for a free, fixed quote.
- Mould you cannot clean out
- Discoloured, yellow sealant
- A messy previous reseal
Bath resealing in Wolverton without replacing anything
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. We work on shower trays & enclosures, basins & vanity units and wet rooms, and the jobs we see most are a messy previous reseal and mould you can’t clean out.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Wolverton (CT15)
- Region
- Kent
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
We work for landlords, letting agents and housing providers in Wolverton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Nearby places to Wolverton
What else we do in Wolverton
Wolverton and nearby
Wolverton is about 3 miles west of Dover, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Wolverton is one of 922 towns and villages in Kent we cover. Our jobs stretch from Wolverton to London (63 miles away).
Postcode districts we cover here: CT15. We regularly work on streets such as Alkham Valley Road and Wolverton Hill and the roads around them. We also cover the places around Wolverton: Ewell Minnis (1 mile north-west), Alkham (1 mile south-west), Chalksole Green (1 mile west), South Alkham (1 mile south-west) and Kearsney (1 mile east). Further out, we also cover Canterbury (12 miles north-west), Dover (3 miles east), Folkestone (5 miles south-west), Deal (8 miles north-east), Hythe (8 miles south-west) and Tower Hamlets (3 miles east).
Local landmarks in Wolverton
Around Wolverton, we work in homes near Sladden Wood, Church of St Anthony the Martyr and Astor College for the Arts and the streets around them. The closest station to Wolverton is Kearsney station, about 1.5 miles north-east of the centre. A little further out are Dover Castle (3.8 miles east) and Crabble Corn Mill (1.9 miles east). Not far away are Sugar Loaf Hill and Dover Western Heights.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Reseal when black spots will not clean off
- Keep the joints dry
- Run the extractor fan during and after showers
- Clean the sealant gently and regularly
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly. An early reseal keeps water where it belongs.
Resealing in Wolverton: why it matters
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. Our prices are the same across the UK, with no extra for Wolverton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
- Nothing taken out or refitted
- Fixed prices from your pictures
See our prices page.
Do you need bath resealing in Wolverton?
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
These are the problems we’re asked about most:
- A messy previous reseal
- Missing sealant behind the taps
- Mould you cannot clean out
- Gaps in the seal
Comparing quotes
- Whether they match the colour on site
- Who will actually do the work
- How to look after the finish
- How your room will be protected
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes about two hours for a bath, and we finish with a tidy-up and a look at the finished work together.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Open a window if you can
- Keep a parking space free if you can
- Clear the area around the damage
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
How we price bath resealing
Prices are worked out job by job. The main factors are:
- How easy the damage is to reach
- The size and number of damaged areas
- Whether we combine several jobs
- The material and finish
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can typically get a fixed price without us visiting. To make it quick:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- Any details about the material
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Wolverton: your questions answered
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Why does my sealant keep splitting?
Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
How long will it take?
Around two hours for a bath, plus curing time.
How much does bath resealing cost in Wolverton?
The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Honest limits
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
- Hidden water damage
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
- Wet rooms
About our accreditations · Every repair comes with a one-year guarantee.
