Argyll and Bute · Scotland

Coloured suite to white in Kilmore, Argyll and Bute

Fixed-price coloured bath resurfacing in Kilmore and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • A suite that doesn’t match a new bathroom
  • A dated coloured suite you’d like in white
Surface Doctor technician refinishing the outside of a roll-top bath

Coloured bath resurfacing in Kilmore

Should you replace it?

Swapping a coloured suite for a white one means new sanitaryware, a plumber and a tiler. Resurfacing turns it white with everything left in place. Our coloured bath resurfacing starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why book with us

  • One visit for most repairs
  • Everything repaired in place
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job

See our pricing and bath cost comparison.

Coloured bath resurfacing in Kilmore without replacing anything

Everything is resurfaced where it stands, so there is no plumbing or tiling. Most suites take one or two days. Whether it’s a suite that doesn’t match a new bathroom and faded or patchy colour, we can help, whatever the material.

A one-year guarantee comes with the work, just as it does everywhere we cover. Treat it like any resurfaced bath: mild cleaners and no suction mats.

Where
Kilmore (PA34)
Area hub
Argyll and Bute
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

How we price coloured bath resurfacing

Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:

  • What kind of damage it is
  • Whether we combine several jobs
  • Access to the area
  • How many areas need work

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

How to get a fixed price

Before you send photos, a few simple things make all the difference:

  • One picture of the entire suite
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • The material, if you know it

A quote takes minutes to ask for: take one close-up and one wider shot of the suite, include your postcode and send them to us. What comes back is a fixed price, not a guess.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kilmore and nearby

Kilmore is about 37 miles north-west of Helensburgh, in Argyll and Bute. Customers in Kilmore get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover 118 places across Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, about 57 miles away.

Our visits in PA34 are booked in the same way as anywhere else. Streets in the area include Riverside Road and Soroba Road. Nearby, we also work in Oban (3 miles north-west), Dunollie (4 miles north-west), Ganavan (4 miles north), Dunbeg (5 miles north) and Connel (6 miles north). If you are somewhere remote, call first so we can plan the visit.

Around Kilmore

Around Kilmore, we work in homes near Oban High School and Kilmore Church, among other places. The closest station to Kilmore is Oban station, roughly 3 miles north-west of the centre. Well-known places in the area include Lorn and Islands Hospital (2.3 miles north-west) and Dunollie Castle (4.1 miles north-west). Green spaces nearby include Loch Nell and Càrn Dearg.

Map of Kilmore © OpenStreetMap contributors

What we cannot put right

Not everything can be repaired, and we’ll tell you before we start. We can’t fix:

  • The inside of a toilet bowl, unless we’ve agreed it will last
  • Items cracked right through
  • Fittings and taps (these are masked, not recoloured)

If in doubt, send photos and we will say what we think.

Materials we repair

  • Avocado, pampas and pink baths
  • Coloured shower trays
  • Coloured basins
  • Whole bathroom suites

Your questions about coloured bath resurfacing in Kilmore

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Do you cover the entire of Argyll and Bute?

The whole UK, including all of Argyll and Bute. Just include your postcode and we’ll offer you dates.

Can you do the toilet too?

Talk to us first. The inside of a bowl is always wet and scrubbed, so we will tell you what will last.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders across Argyll and Bute.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do you need coloured bath resurfacing in Kilmore?

Coloured suites were fitted in huge numbers in the 1970s and 80s, and many are still sound. It’s usually the colour that dates them, not the condition.

Look out for any of the following:

  • A dated coloured suite you’d like in white
  • Faded or patchy colour
  • Selling or letting a home with an old suite
  • A suite that doesn’t match a new bathroom

What to look for in a quote

  • What the guarantee covers, and for how long
  • How long it needs to cure
  • Who will actually do the work
  • Whether there are any call-out or travel charges

Choosing a repair company

What we do, step by step

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a day or two, depending on how many items. We clean up when we’re done and tell you when it’s ready to use.

  1. The room is protected and ventilated.
  2. Each item is cleaned, degreased and any chips repaired.
  3. We key the surface and apply a bonding primer.
  4. We spray the new white (or other colour) finish.
  5. Each item is left to cure, generally ready the next day.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Open a window if you can
  • Keep pets and children out of the room while we work

How to get a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.

Get a free quote

Read more

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.