Warwickshire · England

Wood Floor Repair in Furnace End

Damaged floor in Furnace End? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Burns
  • Chipped board edges
Surface Doctor technician repairing a wooden kitchen worktop

Wood floor repair near Furnace End

How we handle wood floor repair in Furnace End

Laminate swollen by water cannot be repaired, and we’ll tell you if that is the case. We repair damaged boards in place, with the colour and grain matched by hand. We regularly repair solid wood, laminate flooring and engineered wood, and people most frequently call us about scratches from furniture and pets and burns.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right. Use felt pads under furniture and wipe up spills promptly.

Where
Furnace End (B46)
Area hub
Warwickshire
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician carrying out a floor repair in a kitchen

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Our work in Furnace End

Furnace End is about 7 miles west of Nuneaton, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Furnace End is one of 324 towns and villages in Warwickshire we cover. Our nearest city page is Birmingham, about 11 miles away.

Jobs in B46 are booked in the same way as anywhere else. You will find streets such as Nuneaton Road and Bray Bank, all of which we cover. We also travel to Over Whitacre (1 mile north), Church End (1 mile south-west), Botts Green (1 mile north-west), Monwode Lea (1 mile east) and Shustoke (1 mile west). Further out, we also cover Nuneaton (7 miles east), Bedworth (7 miles south-east), Kenilworth (12 miles south), Fordbridge (5 miles south-west), Atherstone (5 miles north-east) and Castle Vale (6 miles west).

Landmarks near Furnace End

Around Furnace End, we work in homes near Church of St Leonard, among other places. The closest station to Furnace End is Coleshill Parkway station, roughly 3.2 miles west. A little further out are Brooklands Hospital (5.8 miles south-west) and Maxstoke Castle (2.1 miles south-west). The countryside around Furnace End includes Ladywalk Reserve.

Map of Furnace End © OpenStreetMap contributors

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Laminate swollen along the joints by water
  • Boards that have lifted or warped
  • Underfloor damage

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Wood-effect vinyl (ask us)
  • Laminate flooring
  • Solid wood
  • Engineered wood

Signs you need wood floor repair in Furnace End

Furniture, pets and dropped items scratch and dent wood and laminate, and moving appliances can gouge them.

Signs it’s time to call us include:

  • Burns
  • Gouges from moving appliances
  • Chipped board edges
  • Scratches from furniture and pets

Questions to ask before booking

  • Whether the price is fixed and includes VAT
  • What aftercare is recommended
  • What preparation is included
  • What protection goes down before work starts

How to compare quotes

Why repair rather than replace?

Swapping a damaged board often means lifting boards to reach it, finding a board that matches and relaying. A repair leaves the floor down. Repairs from £95, with every job priced individually. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Furnace End

  • CHAS, Constructionline and SafeContractor accredited
  • Honest advice, even when it means no job
  • Colour mixed on the day to match
  • A fixed quote before you book

Take a look at our prices page.

Questions from Furnace End

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we’ll plan for it.

What happens once I’ve sent pictures?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Is repairing better than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Do you cover Furnace End?

Yes, we do. Repair technicians travel to Furnace End from across the region, and the price is the same as everywhere else.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a morning or an afternoon. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. We start by cleaning the damage.
  2. Dents, chips and gouges are filled.
  3. We sand the repair flush with the board.
  4. We match the colour and grain by hand.
  5. We finish the repair to match the sheen of the floor.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Mention any parking restrictions or tricky access
  • Tell us if there are stairs or a lift

How to get a price

To get a price, send a couple of photos using our quote form or ring us. We’ll say immediately whether it can be repaired.

Get a fixed quote

Advice

What affects the price in Furnace End

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Whether old repairs or coatings need taking off
  • The material and finish
  • How many items we do on one visit
  • How much damage there is

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

Good photos mean an accurate price. Here’s what helps:

  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • Something in shot to show the size

For a price in Furnace End, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Landlords, agents and businesses in Furnace End

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.