Warwickshire · England
Bath & shower resealing (mastic) in Furnace End, Warwickshire
Our repair technicians come to Furnace End for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Unsealed corners
- Mould you cannot clean out
- Damp near the bath
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Bath resealing in Furnace End, done in place
A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they keep water out. We are often asked to fix old sealant that looks dirty and silicone smeared on tiles, on basins & vanity units, kitchen worktops & sinks and shower trays & enclosures.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Furnace End (B46)
- Region
- Warwickshire
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why reseal now?
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why Furnace End clients choose us
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Everything repaired in place
Read our prices page.
What affects the price in Furnace End
We charge the same across the UK, including Furnace End. What changes the price is:
- Unusual colours or finishes
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Natural light rather than flash
- A close-up of the damage, in focus
- Any details about the material
- One picture of the whole bath or shower
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes around two hours. We clean up when we’re done and let you know when you can use it again.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Also near Furnace End
Other services in Furnace End
Furnace End and the surrounding area
Furnace End is about 7 miles west of Nuneaton, in Warwickshire. Jobs in Furnace End are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in all 324 towns and villages across Warwickshire, from the larger towns to small villages. We work right across the region, from Furnace End to Birmingham (11 miles away).
Every address in B46 is within our area. Whether you live on Nuneaton Road and Bray Bank or anywhere nearby, a technician can come to you. We also travel to Over Whitacre (1 mile north), Church End (1 mile south-west), Botts Green (1 mile north-west), Monwode Lea (1 mile east) and Shustoke (1 mile west). Further out, we also cover Nuneaton (7 miles east), Bedworth (7 miles south-east), Kenilworth (12 miles south), Fordbridge (5 miles south-west), Atherstone (5 miles north-east) and Castle Vale (6 miles west).
Around Furnace End
Typical jobs here are in homes near Church of St Leonard. For rail, the closest station is Coleshill Parkway station, about 3.2 miles west of the centre. A little further out are Brooklands Hospital (5.8 miles south-west) and Maxstoke Castle (2.1 miles south-west). Open spaces near Furnace End include Ladywalk Reserve.
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- A bath or tray that moves, until its support is fixed
- Gaps so wide they need filling or trims before sealing
- Water damage behind the bath that needs a builder
If in doubt, send photos and we will say what we think before booking.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Basins & vanity units
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
If you manage property in Furnace End, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Furnace End: your questions answered
Why does my sealant keep going mouldy?
Damp is the cause. Ventilation and drying keep it clean longer.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Aftercare tips
To keep it looking its best:
- Reseal at the first sign of lifting
- Wipe the joints dry after use
- Keep bottles off the joints
- Ventilate the bathroom well
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Signs you need bath resealing in Furnace End
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
Customers normally contact us about:
- Mould you can’t clean out
- Water getting behind the bath or tray
- Missing sealant behind the taps
- An untidy old seal
Before booking anyone
- Aftercare advice
- What the guarantee covers, and for how long
- How changes to the job are handled
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
