Warwickshire · England
Non-Slip Bath Coating for Furnace End homes
Fixed-price non-slip bath coating in Furnace End and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a morning or an afternoon. Before we go, we will explain how long to leave it and how to look after it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Getting ready for the visit
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our non-slip bath coating in Furnace End
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you’re dealing with bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can help, on resurfaced baths, shower trays and enamelled baths alike.
All our work is covered by our one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Furnace End (B46)
- Area hub
- Warwickshire
- Guarantee
- One year on every repair
- Price
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Furnace End
What else we do in Furnace End
When a repair isn’t the answer
Some jobs are not right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
Repairing versus replacing in Furnace End
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why Furnace End clients choose us
- Free fixed quotes from pictures
- Most jobs done in one visit
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
See our full price list.
Furnace End questions
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover Furnace End?
We do. We send a technician to Furnace End for every job, and the price is the same as everywhere else.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Landlord and trade work in Furnace End
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About Furnace End
Furnace End is about 7 miles west of Nuneaton, in Warwickshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 324 places in Warwickshire, from the larger towns to small villages. We work right across the region, from Furnace End to Birmingham (about 11 miles away).
Our visits in B46 work the same way as everywhere else we cover. Local streets include Nuneaton Road and Bray Bank, and we cover them all. If you are just outside Furnace End, we cover Over Whitacre (1 mile north), Church End (1 mile south-west), Botts Green (1 mile north-west), Monwode Lea (1 mile east) and Shustoke (1 mile west). We also work in nearby towns such as Nuneaton (7 miles east), Bedworth (7 miles south-east), Kenilworth (12 miles south), Fordbridge (5 miles south-west), Atherstone (5 miles north-east) and Castle Vale (6 miles west).
Landmarks near Furnace End
In Furnace End, that means homes near Church of St Leonard. The nearest railway station is Coleshill Parkway station, about 3.2 miles west of the centre. Nearby you’ll also find Brooklands Hospital (5.8 miles south-west) and Maxstoke Castle (2.1 miles south-west). For a walk, there is Ladywalk Reserve.
How we price non-slip bath coating
A fixed quote means you know the cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- The material, if you know it
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What we are called out for in Furnace End
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
People usually call us when they notice one of these:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
What to look for in a quote
- Who will actually do the work
- What aftercare is recommended
- Whether the colour is mixed to match
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
