Pembrokeshire · Wales

Wood Floor Repair for Slade homes

Scratch, dent, chip and burn repairs to wood and laminate floors for homes and businesses in Slade and across Pembrokeshire. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Burns
  • Dents from dropped items
Surface Doctor technician repairing a wooden kitchen worktop

Wood floor repair near Slade

About our wood floor repair in Slade

Laminate swollen by water can’t be repaired, and we’ll tell you if that is the case. We repair damaged boards in place, with the colour and grain matched by hand. Common call-outs are for chipped board edges and gouges from moving appliances, on solid wood, wood-effect vinyl (ask us) and engineered wood.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it. Use felt pads under furniture and wipe up spills promptly.

Technician kneeling to repair a kitchen floor
Where
Slade (SA61)
Region
Pembrokeshire
Cover
A year, on every repair
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

Slade: your questions answered

Can you repair something that is been repaired before?

Typically, yes. We remove the old repair before doing a new one, so let us know about it.

Do you cover Slade?

We do. We send a technician to Slade for every job, and the price is the same as everywhere else.

What does wood floor repair cost?

Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Which areas do you work in?

We cover the entire UK, including Slade and the rest of Pembrokeshire. Send your postcode with your photos and we will confirm dates.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

Covering Slade

Slade is about 1 mile north-west of Haverfordwest, in Pembrokeshire. Our technicians come to customers in Slade and nearby villages, so there’s no workshop to go to. Slade is one of 223 towns and villages in Pembrokeshire where we work.

Here we cover the SA61 postcode area. Nearby, we also work in Haverfordwest (1 mile south-east), The Marsh (1 mile south-east), Prendergast (1 mile east), Tangiers (1 mile north-east) and Withybush (2 miles north-east). Further out, we also cover Milford Haven (7 miles south), Pembroke (10 miles south), Pembroke Dock (8 miles south), Dinbych-y-Pysgod (15 miles south-east), The Green (15 miles south-east) and Fishguard (13 miles north).

Near you in Slade

In Slade, that means homes near Haverfordwest Grammar School, Waldo Williams Primary School and The Rising Sun Inn and the streets around them. Nearby too are Tabernacle English Congregational Church (0.8 miles south-east) and Haverfordwest High VC School (1 mile south). The closest station to Slade is Haverfordwest station, about 1.3 miles south-east of the centre. Other landmarks nearby include Withybush General Hospital (1 mile east) and Former County Gaol (0.9 miles south-east). Not far away are Boulston Hill.

Map of Slade © OpenStreetMap contributors

Why repair rather than replace?

Swapping a damaged board can mean lifting the floor back to it, sourcing a matching board and relaying. Repairing it works with the boards in place. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.

What you get with us

  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited
  • Honest advice, even when it means no job
  • Most jobs done in one visit

Take a look at our pricing.

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a few hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. We start by cleaning the damage.
  2. Next we fill the dents and chips.
  3. We sand the repair flush with the board.
  4. We recreate the colour and grain by hand.
  5. Finally we match the sheen of the floor.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing

Getting a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a fixed price

Read more

What we can’t put right

A repair isn’t right for every job, for example:

  • Laminate swollen along the joints by water
  • Boards that have lifted or warped
  • Underfloor damage

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Slade

  • Laminate flooring
  • Wood-effect vinyl (ask us)
  • Solid wood
  • Engineered wood

What wood floor repair costs

Repairs from £95. Prices are worked out job by job. The main factors are:

  • Unusual colours or finishes
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • The size and number of damaged areas

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • The material, if you know it

The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

When to call us in Slade

Furniture, pets and dropped items scratch and dent wood and laminate, and sliding appliances can gouge the boards.

Typical reasons for a call-out include:

  • Burns
  • Gouges from moving appliances
  • Chipped board edges
  • Scratches from furniture and pets

Before you book anyone

  • How to look after the finish
  • What protection goes down before work starts
  • How changes to the job are handled
  • The length of the guarantee and what it covers

How to compare quotes

Work for landlords and builders

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.