Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Slade, Pembrokeshire
Full bath re-enamelling and resurfacing in Slade, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that will not shift
How we handle bath re-enamelling in Slade
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on cast iron baths, basins & shower trays and acrylic baths, and common reasons people get in touch are a peeling or bubbling previous coating and a bath in a colour that no longer suits.
Every repair comes with a one-year guarantee, wherever you are in Pembrokeshire.
- Where
- Slade (SA61)
- Region
- Pembrokeshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Every repair guaranteed for a year
- One price list for the whole UK
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
Take a look at our pricing and guide to resurfacing and replacement costs.
When to call us in Slade
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
You may need us if you’ve spotted:
- Several chips and rust patches
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
What your quote should include
- How long it needs to cure
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
- Who will actually do the work
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Your questions about bath re-enamelling in Slade
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you cover Slade?
Yes, we do. Technicians travel to Slade from across the region, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
About Slade
Slade is about 1 mile north-west of Haverfordwest, in Pembrokeshire. Jobs in Slade are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover 223 places across Pembrokeshire.
Our visits in SA61 work the same way as everywhere else we cover. Other places close to Slade include Haverfordwest (1 mile south-east), The Marsh (1 mile south-east), Prendergast (1 mile east), Tangiers (1 mile north-east) and Withybush (2 miles north-east). Larger places within reach include Milford Haven (7 miles south), Pembroke (10 miles south), Pembroke Dock (8 miles south), Dinbych-y-Pysgod (15 miles south-east), The Green (15 miles south-east) and Fishguard (13 miles north).
Local landmarks in Slade
In Slade, that means homes near Haverfordwest Grammar School, Waldo Williams Primary School and The Rising Sun Inn. Nearby too are Tabernacle English Congregational Church (0.8 miles south-east) and Haverfordwest High VC School (1 mile south). The nearest railway station is Haverfordwest station, roughly 1.3 miles south-east of the centre. A little further out are Withybush General Hospital (1 mile east) and Former County Gaol (0.9 miles south-east). The countryside around Slade includes Boulston Hill.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Slade
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- How much damage there is
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The material
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- Something in shot to show the size
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- A picture taken from further back
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Also near Slade
Other services in Slade
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Ask for a price
Email us pictures of the damage and one of the entire item, with your SA61 postcode, and we will come back with a fixed quote.
Advice
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
How to care for the repair
Aftercare is simple:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Respect the curing time we give you
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
