Carmarthenshire · Wales
Non-slip bath & shower coating in Aber-arad, Carmarthenshire
Fixed-price non-slip bath coating in Aber-arad and the surrounding area, typically in one visit and guaranteed for a year.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
When to call us in Aber-arad
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
The things customers normally mention when they call are:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Questions to ask before booking
- What aftercare is recommended
- What protection goes down before work starts
- How long it needs to cure
- Whether they match the colour on site
Non-slip bath coating at your home in Aber-arad
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Our repair technicians work on resurfaced baths, acrylic baths and shower trays, and common reasons people contact us are worn-out textured areas and resurfaced baths that are now too smooth.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Aber-arad (SA38)
- County
- Carmarthenshire
- Cover
- One year on every repair
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Places near Aber-arad
More services for Aber-arad
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
Before we arrive
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Repair or replace in Aber-arad?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Fixed prices from your pictures
- One price list for the entire UK
- Rooms protected and left tidy
- One visit for most repairs
See our full price list.
When we would advise against a repair
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
Your questions about non-slip bath coating in Aber-arad
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
How we price non-slip bath coating
We don’t charge extra for travel to Aber-arad. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Doing more than one item at once
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Details of any past repairs
- A wider photo showing the whole bath or shower tray
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Most clients in Aber-arad get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Our work in Aber-arad
Aber-arad is about 14 miles north-west of Carmarthen, in Carmarthenshire. Anywhere in SA38, we carry out the work at your property. We work in 195 places across Carmarthenshire.
We work across SA38. You will find streets such as Market Place, Station Road and Heol Dewi, and we cover them all. You’ll find Aber-arad on the A475 and A484, which makes it straightforward to reach. Close by, we cover Newcastle Emlyn (1 mile north-west), Bryndioddef-isaf (1 mile north), Pentrecagal (2 miles east), Cwm-cou (2 miles north-west) and Felindre (3 miles east). Further out, we also cover Carmarthen (14 miles south-east), Cwmoernant (13 miles south-east), Pen-sarn (14 miles south-east), Tanerdy (14 miles south-east), Tregynnwr (15 miles south-east) and Sanclêr (15 miles south).
Near you in Aber-arad
Locally, our jobs take us to homes close to Coopers Arms, among other places. Further afield, we also cover the area around National Wool Museum (2.7 miles east) and Newcastle Emlyn Castle (less than half a mile north-west). Not far away are Allt yr Esgob.
About our accreditations · Every repair comes with a one-year guarantee.
