Na h-Eileanan Siar · Scotland

Non-slip bath & shower coating in Aird, Na h-Eileanan Siar

We travel to Aird for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Aird?

What non-slip bath coating costs

There is no area surcharge for Aird. What changes the price is:

  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • How easy the damage is to reach

Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed price

Two or three clear pictures are usually enough. It helps if you send:

  • Where you are, by postcode
  • Details of any past repairs
  • A clear, close picture of the problem area
  • A photo taken from further back

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.

About our non-slip bath coating in Aird

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, across resurfaced baths, enamelled baths and wet room floors (ask us).

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Aird (HS2)
Region
Na h-Eileanan Siar
Guarantee
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Where we work around Aird

Aird is in Na h-Eileanan Siar. Jobs in Aird are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover all 87 towns and villages across Na h-Eileanan Siar, from the larger towns to small villages.

Our repair technicians cover all of HS2 and the streets around it. Jobs here include addresses on Barraid Mhicsuain and Slighe Mhicsuain and the roads around them. We also travel to Portvoller (1 mile north-east), Port Mholair (1 mile north-east), Shulishader (1 mile west), Sulaisiadar (2 miles south-west) and Garrabost (3 miles south-west). If you’re somewhere remote, call first so we can plan the visit.

Near you in Aird

Typical jobs here are in homes near Upper Aird and Aird Primary School. Not far away are Loch an Tiumpan.

Map of Aird © OpenStreetMap contributors

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

How the visit works

We agree an arrival time beforehand. On site, it takes a few hours for most jobs. The room is left tidy and you will know when it can be used.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

How to prepare

  • Point us to the nearest place to park
  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Get a fixed quote

Related advice

For landlords and businesses

Landlords, letting agents and housing providers in Aird use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • One visit for most repairs
  • Nothing taken out or refitted
  • We’ll tell you if it’s not worth repairing
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing.

Questions from Aird

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

How do I get a price for non-slip bath coating in Aird?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How do I book?

Send pictures through the quote form or call 0345 017 0787.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Do you come to Aird?

Yes, we do. We send a technician to Aird for every job, and the price is the same as everywhere else.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Honest limits

We will always be straight with you, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths

When to call us in Aird

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

These are the problems we’re asked about most:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

What to look for in a quote

  • How long the guarantee is and what it covers
  • How the colour is matched
  • If travel is included in the price
  • Aftercare advice

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.