Devon · England

Non-slip bath & shower coating in All Saints, Devon

Non-slip bath coating in All Saints without the cost of replacing. Get a fixed quote from your photos, then book a visit.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in All Saints?

What affects the price in All Saints

We charge the same across the UK, including All Saints. What changes the price is:

  • The size and number of damaged areas
  • Previous DIY repairs that have to come out
  • The material and finish
  • How easy the damage is to reach

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Two or three clear photos are typically enough. Try to include:

  • A coin beside the damage so we can judge size
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare
  • The material, if you know it

To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.

Non-slip bath coating in All Saints, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our technicians work on resurfaced baths, enamelled baths and acrylic baths, and people most frequently call us about bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.

You get a one-year guarantee, the same in All Saints as everywhere else we work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
All Saints (EX13)
Region
Devon
Cover
One year on every repair
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

The process

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep a parking space free if you can
  • Tell us if there are stairs or a lift
  • Move bottles, mats and clutter away from the area

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed price

Read more

Signs you need non-slip bath coating in All Saints

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People usually call us when they notice something like this:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Before booking anyone

  • Whether a trained technician does the job
  • What happens if the damage is worse than the photos show
  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long

Choosing a repair company

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Repair or replace in All Saints?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • A fixed quote before you book
  • Every repair guaranteed for a year
  • No need to remove anything
  • One visit for most repairs

Read our full price list.

Our work in All Saints

All Saints is about 5 miles south of Chard, in Devon. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. All Saints is one of 586 places in Devon we cover.

Here we cover the EX13 postcode area. That includes homes on Goldsmith Lane and Knight's Lane. If you’re just outside All Saints, we cover Smallridge (1 mile south-west), Tytherleigh (1 mile north-east), Chardstock (2 miles north), Holditch (2 miles east) and Tatworth (3 miles north-east). Further out, we also cover Sidmouth (14 miles south-west), Honiton (9 miles west), Seaton (8 miles south-west), Ottery St Mary (14 miles west), Colyton (6 miles south-west) and Sidford (13 miles south-west).

Around All Saints

Our clients here include homes close to Axe Valley Academy, Church of All Saints and Ridgeway Inn and the streets around them. All Saints’s nearest station is Axminster station, roughly 2.3 miles south-west. A little further out are Axminster Hospital (1.9 miles south). Green spaces nearby include Lambert's Castle Hill.

Map of All Saints © OpenStreetMap contributors

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths

All Saints: your questions answered

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

How do I get a price for non-slip bath coating in All Saints?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.