Staffordshire · England
Non-slip bath & shower coating in Alsager, Staffordshire
Local non-slip bath coating for Alsager: photo quotes, tidy work and a year’s guarantee.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Nothing taken out or refitted
- One price list for the whole UK
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Take a look at our full price list.
About our non-slip bath coating in Alsager
The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. Common call-outs are for a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, on shower trays, resurfaced baths and enamelled baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Alsager (ST7)
- Region
- Staffordshire
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Alsager
Also in Alsager
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
How to prepare
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Our work in Alsager
Alsager is about 6 miles east of Crewe, in Staffordshire. Whether you are in the middle of Alsager or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 512 towns and villages in Staffordshire. Our jobs stretch from Alsager to Manchester (about 26 miles away).
Our visits in ST7 are booked in the same way as anywhere else. From Station Road, Church Road and Green Drive or a nearby road, we can come to you. You’ll find Alsager on the A50 and A5011, so it’s easy for us to reach. We also cover the places around Alsager: Radway Green (1 mile south-west), Oakhanger (2 miles south-west), Millend (2 miles south), Barthomley (2 miles south-west) and Park End (2 miles south). We also work in nearby towns such as Newcastle-under-Lyme (6 miles south-east), Longton (11 miles south-east), Stone (15 miles south-east), Leek (12 miles east), Biddulph (6 miles east) and Kidsgrove (3 miles east).
Around Alsager
In Alsager, that means homes near Alsager School, Alsager Highfields Community Primary School and Mere Inn and the streets around them. For rail, the closest station is Alsager station, about 0.5 miles south-east of the centre. A little further out are Englesea Brook Chapel and Museum of Primitive Methodism (3.6 miles south-west) and Mow Cop Castle (4.1 miles east). Not far away are Bignall Hill and Parrot's Drumble.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
How we price non-slip bath coating
A fixed quote means you know the cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Access to the area
We charge the same wherever you are, so there is no premium for Alsager. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can usually get a fixed quote without us visiting. To help us price it:
- Where you are, by postcode
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job the same day in most cases.
Questions from Alsager
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Materials we work on in Alsager
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
- Acrylic baths
What we’re called out for in Alsager
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- The length of the guarantee and what it covers
- Whether the price covers travel
- How to care for the finish
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
