Staffordshire · England

Non-slip bath & shower coating in Millend, Staffordshire

Clear non-slip coatings for baths and shower trays at your home in Millend, with a one-year guarantee on every repair.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Millend

What non-slip bath coating costs

We don’t charge extra for travel to Millend. The price depends on:

  • How hard the colour is to match
  • What kind of damage it is
  • Doing more than one item at once
  • Whether old repairs or coatings need taking off

A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.

How to get a fixed quote

Most quotes are done from pictures alone. To make it quick:

  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • A picture taken from further back
  • Daylight if possible, and no flash reflection

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.

Non-slip bath coating in Millend, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can generally put it right, whatever the material.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Millend (ST7)
County
Staffordshire
Warranty
A year, on every repair
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

For anyone letting property in or around Millend, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Millend questions

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do you cover Millend?

Yes. We cover the whole UK and come to Millend and the rest of Staffordshire. Send photos and we will quote, or call 0345 017 0787.

Can you repair something that is been repaired before?

Normally, yes. The old repair comes out first, so mention it when you send photos.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Will I see the coating?

Very little: the treated area looks slightly matt.

What happens next?

We come back with a fixed price. You are under no obligation.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths

Millend and the surrounding area

Millend is about 2 miles south of Alsager, in Staffordshire. Jobs in Millend are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Millend is one of 512 towns and villages in Staffordshire we cover. We work right across the region, from Millend to Manchester (29 miles away).

All of ST7 is within our area. Neighbouring places we cover include Park End (1 mile south-west), Audley (1 mile south), Barthomley (1 mile west), Radway Green (2 miles north-west) and Halmer End (2 miles south). Larger places within reach include Newcastle-under-Lyme (5 miles south-east), Longton (9 miles south-east), Stone (14 miles south-east), Leek (12 miles east), Biddulph (7 miles north-east) and Kidsgrove (3 miles north-east).

What’s near Millend

In Millend, that means homes near Boughey Arms, Sir Thomas Boughey High School and Church of St James. The closest station to Millend is Alsager station, about 1.8 miles north. Well-known places in the area include Heighley Castle (3.7 miles south) and Audley and Bignall End (1.6 miles south-east). For a walk, there is Parrot's Drumble and Westport Lake.

Map of Millend © OpenStreetMap contributors

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Our prices are the same across the UK, with no extra for Millend. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • Most jobs done in one visit
  • Everything repaired in place
  • Straight answers about what a repair can do
  • Rooms protected and left tidy

See our prices page.

Do you need non-slip bath coating in Millend?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • Whether the price covers travel
  • What happens if the damage is worse than the pictures show
  • What the guarantee covers, and for how long
  • How the colour is matched

How to compare quotes

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, generally overnight.

How to prepare

  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive
  • Mention if the room is upstairs or in a flat

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.