Hampshire · England

Non-Slip Bath Coating for Alverstoke homes

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Alverstoke. Send pictures for a free, fixed quote.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Alverstoke?

What we can’t put right

It helps to know what we cannot do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays

Non-slip bath coating at your home in Alverstoke

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you are dealing with safety for older or less mobile people and a bath or tray that is slippery when wet, we can generally put it right.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Alverstoke (PO12)
Area hub
Hampshire
Guarantee
12 months on all our work
Price
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why book with us

  • No need to remove anything
  • Same prices wherever you are
  • Fixed prices from your photos
  • CHAS, Constructionline and SafeContractor accredited

Read our prices page.

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

Alverstoke and the surrounding area

Alverstoke is about 2 miles south of Gosport, in Hampshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 683 places across Hampshire. You can also see our page for London, about 68 miles away.

Jobs in PO12 are booked in the same way as anywhere else. We regularly work on streets such as The Lane, Fort Road and Church Road. Neighbouring places we cover include Clayhall (1 mile east), Haslar (1 mile east), Privett (1 mile north-west), Portsmouth Point (2 miles north-east) and Portsea (2 miles north-east). We also work in nearby towns such as Havant (9 miles north-east), Fareham (5 miles north), Horndean (11 miles north-east), Hedge End (12 miles north-west), Waterlooville (9 miles north-east) and Purbrook (8 miles north-east).

Around Alverstoke

In Alverstoke, that means homes near Alverstoke Community Infant School, Bay House School and Village Home pub, among other places. The closest station to Alverstoke is Portsmouth Harbour station, roughly 2.1 miles north-east. Further afield, we also cover the area around Southsea (2.5 miles east) and Tricorn Centre (3 miles north-east). Open spaces near Alverstoke include West of the River Alver.

Map of Alverstoke © OpenStreetMap contributors

What happens on the day

Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a morning or an afternoon, and we’ll tell you if anything changes.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Before we arrive

  • Keep a parking space free if you can
  • Ensure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area

How to get a price

Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Alverstoke, and we will come back with a fixed quote.

Send photos for a quote

Related advice

Signs you need non-slip bath coating in Alverstoke

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Send us a picture if you notice any of these:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas

What to look for in a quote

  • Whether a trained technician does the job
  • What protection goes down before work starts
  • What happens if they find more damage
  • How the colour is matched

10 questions to ask before you book

Common questions in Alverstoke

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Is the work guaranteed?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

What happens next?

We check the damage, the material and your postcode, then reply with a quote with dates.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

How we price non-slip bath coating

There’s no charge for travel to Alverstoke. The price comes down to:

  • How many areas need work
  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • Unusual colours or finishes

Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Send photos for a quote

Most quotes are done from pictures alone. To make it quick:

  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • Natural light rather than flash
  • Any details about the material

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote the same day in most cases.

Landlords, agents and businesses in Alverstoke

For anyone letting property in or around Alverstoke, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.