Isle of Wight · England

Non-Slip Bath Coating in Puckpool

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Puckpool. Send photos for a free, fixed quote.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Puckpool

About our non-slip bath coating in Puckpool

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We work on wet room floors (ask us), shower trays and resurfaced baths, and common reasons people get in touch are a bath or tray that is slippery when wet and worn-out textured areas.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Puckpool (PO33, PO34)
Region
Isle of Wight
Cover
12 months on all our work
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

How the visit works

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Ensure the area is dry
  • Tell us about any previous repairs or coatings

Getting a price

Most clients in Puckpool get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Read more

Do you need non-slip bath coating in Puckpool?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • When it can be used again
  • How long the guarantee is and what it covers
  • Who turns up on the day
  • What aftercare is recommended

Our hiring checklist

What a repair can’t fix

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays

Common questions in Puckpool

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Isle of Wight.

How do I get a price for non-slip bath coating in Puckpool?

We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your PO33 postcode.

Which areas do you work in?

Everywhere in the UK, Puckpool included. There is no extra charge for travel.

Are there extra charges for Puckpool?

No. Our quotes include travel, and we charge the same wherever you are.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

What affects the price in Puckpool

We give every job a fixed quote from photos. These are the things that affect it:

  • The material
  • How many areas need work
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

How to get a fixed price

Most quotes are done from photos alone. To make it quick:

  • Your postcode, so we can check dates
  • A wider photo showing the entire bath or shower tray
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare

Email us a picture of the damage and a wider shot of the whole item, with your PO33 postcode, and we will reply with a fixed price.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why Puckpool clients choose us

  • Typically one visit, start to finish
  • We will tell you if it’s not worth repairing
  • Rooms protected and left tidy
  • Same prices wherever you are

See our pricing.

Covering Puckpool

Puckpool is about 1 mile east of Ryde, in Isle of Wight. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Puckpool is one of 125 towns and villages in Isle of Wight where we work. You can also see our page for London, about 70 miles away.

Postcode districts we cover here: PO33 and PO34. Whether you live on Appley Road, Appley Lane and Seldon Avenue or anywhere nearby, we can come to you. We also travel to Appley (1 mile west), Spring Vale (1 mile east), Pondwell (1 mile south-east), Elmfield (1 mile south-west) and Oakfield (1 mile south-west). Further out, we also cover Newport (7 miles west), Cowes (8 miles west), Sandown (5 miles south), Shanklin (7 miles south), Ventnor (10 miles south) and East Cowes (7 miles west). For island and remote addresses, ring us first and we’ll plan the trip.

Local landmarks in Puckpool

In Puckpool, that means homes near Ryde Academy, St John's Church and Ryde School with Upper Chine. You will also find Oakfield Church of England Aided Primary School (0.5 miles west) and Appley Manor Hotel (under half a mile south-west). Puckpool’s nearest station is Ryde St Johns Road station, roughly 1 mile west. Well-known places in the area include Cothey Bottom Heritage Centre (1.1 miles south) and Southsea Castle (4.1 miles north-east). Green spaces nearby include Alan Hersey Nature Reserve and Brading Down.

Map of Puckpool © OpenStreetMap contributors

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

For anyone letting property in or around Puckpool, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.